PIC16LF1933-E/MV Microchip Technology, PIC16LF1933-E/MV Datasheet - Page 155

• Manufacturer Part Number: PIC16LF1933-E/MV
• Description: IC MCU 8BIT 7KB FLASH 28UQFN
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 16Fr

Specifications of PIC16LF1933-E/MV

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 32MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LCD, POR, PWM, WDT
• Number Of I /o: 25
• Program Memory Size: 7KB (4K x 14)
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 11x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 28-UFQFN Exposed Pad
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

17.0
The Digital-to-Analog Converter supplies a variable
voltage reference, ratiometric with the input source,
with 32 selectable output levels.
The input of the DAC can be connected to:
• External V
• V
• FVR (Fixed Voltage Reference)
The output of the DAC can be configured to supply a
reference voltage to the following:
• Comparator positive input
• ADC input channel
• DACOUT pin
• Capacitive Sensing module (CSM)
The Digital-to-Analog Converter (DAC) can be enabled
by setting the DACEN bit of the DACCON0 register.
17.1
The DAC has 32 voltage level ranges. The 32 levels
are set with the DACR<4:0> bits of the DACCON1
register.
The DAC output voltage is determined by the following
equations:
EQUATION 17-1:
17.2
The DAC output value is derived using a resistor ladder
with each end of the ladder tied to a positive and
negative voltage reference input source. If the voltage
of either input source fluctuates, a similar fluctuation will
result in the DAC output value.
The value of the individual resistors within the ladder
can be found in the applicable Electrical Specifications
chapter.
 2011 Microchip Technology Inc.
V
IF DACEN = 0 & DACLPS = 1 & DACR[4:0] = 11111
IF DACEN = 0 & DACLPS = 0 & DACR[4:0] = 00000
V
V
V
IF DACEN = 1
V
OUT
SOURCE
OU T
SOURCE
O U T
DD
=
supply voltage
=
=
- = V
+ = V



DIGITAL-TO-ANALOG
CONVERTER (DAC) MODULE
Output Voltage Selection
Ratiometric Output Level
V

V
V
S OU R CE
S OU RC E
SOURCE
REF
SS
DD
, V
pins
REF
+ V
+
–
–
, or FVR BUFFER 2
DAC OUTPUT VOLTAGE
SOURCE
-


DACR 4:0
----------------------------- -
2
5





+
V
SOURCE
Preliminary
-
17.3
The DAC can be output to the DACOUT pin by setting
the DACOE bit of the DACCON0 register to ‘1’.
Selecting the DAC reference voltage for output on the
DACOUT pin automatically overrides the digital output
buffer and digital input threshold detector functions of
that pin. Reading the DACOUT pin when it has been
configured for DAC reference voltage output will
always return a ‘0’.
Due to the limited current drive capability, a buffer must
be used on the DAC voltage reference output for
external connections to DACOUT.
an example buffering technique.
DAC Voltage Reference Output
PIC16(L)F1933
Figure 17-2
DS41575A-page 155
shows