PEB 4364 T V1.2 Infineon Technologies, PEB 4364 T V1.2 Datasheet - Page 141

• Manufacturer Part Number: PEB 4364 T V1.2
• Description: IC SLIC VOICE ACCESS PDSO-36
• Manufacturer: Infineon Technologies
• Series: DuSLICr

Specifications of PEB 4364 T V1.2

• Function: Dual Channel Subscriber Line Interface Circuit (DuSLIC)
• Interface: IOM-2, PCM
• Number Of Circuits: 2
• Voltage - Supply: 3.3 V ~ 5 V
• Current - Supply: 105mA
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 36-PDSO
• Includes: DTMF Generator and Decoder, Line Echo Cancellation (LEC), Teletax (TTX) Generation, Universal Tone Detection (UTD)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Power (watts): -
• Other names: PEB4364TV1.2XT; SP000007728

Table 31
Command/Indication
Operation (CIOP)
M2
1
0
0
1
1
1
0
ADR[2:0] Channel address for the subsequent data
CMD[2:0] Command for programming the SLICOFI-2x (OP = 1) or command
Preliminary Data Sheet
M1
1
0
1
0
1
0
0
equivalent to the CIDD channel bits M[2:0] in microcontroller interface mode
(OP = 0)
The first four commands have no second command byte following.
All necessary information is present in the first command byte.
CMD[2:0] = 0 0 0
CMD[2:0] = 0 0 1
CMD[2:0] = 0 1 0
CMD[2:0] = 0 1 1
The second four commands are followed by a second command byte that
defines additional information, such as specifying sub-addresses of the
CRAM.
CMD[2:0] = 1 0 0
CMD[2:0] = 1 0 1
ADR[2:0] = 0 0 0
ADR[2:0] = 0 0 1
(other codes reserved for future use)
M2, M1, M0: General Operating Mode
M0
1
0
0
1
0
0
1
Soft reset of the chip (reset routine for all channels will
reset all configuration registers, CRAM data is not
affected).
Soft reset for the specified channel A or B in ADR field
(only available when pin PCM/IOM-2 = 1)
Reserved for future use
SOP command (Status Operation; programming, and
monitoring of all status-relevant data).
and monitoring of all coefficients in the CRAM).
Resychronization of the PCM interface
COP command (Coefficient Operation; programming,
SLICOFI-2x Command Structure and Programming
SLICOFI-2x Operating Mode
(for details see
Modes” on Page
Sleep, Power Down (PDRx)
Power Down High Impedance (PDH)
Any Active mode
Ringing (ACTR Burst On)
Active with Metering
Ground Start
Ring Pause
Channel A
Channel B
141
“Overview of all DuSLIC Operating
74)
DS3, 2003-07-11
DuSLIC