SC68C752BIB48,157 NXP Semiconductors, SC68C752BIB48,157 Datasheet - Page 15

• Manufacturer Part Number: SC68C752BIB48,157
• Description: IC UART DUAL 48LQFP
• Manufacturer: NXP Semiconductors

Specifications of SC68C752BIB48,157

• Number Of Channels: 2, DUART
• Package / Case: 48-LQFP
• Fifo's: 64 Byte
• Voltage - Supply: 2.5V, 3.3V, 5V
• With Auto Flow Control: Yes
• With False Start Bit Detection: Yes
• With Modem Control: Yes
• Mounting Type: Surface Mount
• Data Rate: 5 Mbps
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 2.25 V
• Supply Current: 4.5 mA
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Operating Supply Voltage: 2.5 V or 3.3 V or 5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 935278767157; SC68C752BIB48; SC68C752BIB48

NXP Semiconductors
SC68C752B_4
Product data sheet
6.6.1.1 Transmitter
6.6.1.2 Receiver
6.6.1 Single DMA transfers (DMA mode 0/FIFO disable)
6.6 DMA operation
There are two modes of DMA operation, DMA mode 0 or DMA mode 1, selected by
FCR[3].
In DMA mode 0 or FIFO disable (FCR[0] = 0) DMA occurs in single character transfers. In
DMA mode 1, multi-character (or block) DMA transfers are managed to relieve the
processor for longer periods of time.
Figure 10
When empty, the TXRDYn signal becomes active. TXRDYn will go inactive after one
character has been loaded into it.
RXRDYn is active when there is at least one character in the FIFO. It becomes inactive
when the receiver is empty.
Fig 10. TXRDYn and RXRDYn in DMA mode 0/FIFO disable
wrptr
wrptr
shows TXRDYn and RXRDYn in DMA mode 0/FIFO disable.
FIFO EMPTY
transmit
5 V, 3.3 V and 2.5 V dual UART, 5 Mbit/s (max.), with 64-byte FIFOs
Rev. 04 — 20 January 2010
TXRDYn
TXRDYn
location filled
at least one
rdptr
rdptr
FIFO EMPTY
receive
SC68C752B
© NXP B.V. 2010. All rights reserved.
location filled
RXRDYn
RXRDYn
at least one
002aaa232
15 of 48