KSZ8862 Micrel Semiconductor, KSZ8862 Datasheet - Page 59
KSZ8862
Manufacturer Part Number
KSZ8862
Description
2-port Ethernet Switch With Non-pci Interface And Fiber Support
Manufacturer
Micrel Semiconductor
Datasheet
1.KSZ8862.pdf
(125 pages)
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
KSZ8862-16MQL-FX
Manufacturer:
Micrel Inc
Quantity:
135
Company:
Part Number:
KSZ8862-16MQL-FX
Manufacturer:
Micrel
Quantity:
67
Company:
Part Number:
KSZ8862-32MQL
Manufacturer:
Micrel
Quantity:
139
Company:
Part Number:
KSZ8862-32MQL-FX
Manufacturer:
Micrel Inc
Quantity:
135
Company:
Part Number:
KSZ8862-32MQL-FX
Manufacturer:
Micrel
Quantity:
258
Bank 2 Host MAC Address Register Middle (0x02): MARM
The middle word of Host MAC address.
The following table shows the register bit fields:
Bank 2 Host MAC Address Register High (0x04): MARH
The high word of Host MAC address.
The following table shows the register bit fields.
Bank 3 On-Chip Bus Control Register (0x00): OBCR
This register controls the on-chip bus speed for the KSZ8862M. It is used for power management when the external host
CPU is running at a slow frequency. The default of the on-chip bus speed is 125 MHz without EEPROM. When the
external host CPU is running at a higher clock rate, the on-chip bus should be adjusted for the best performance.
Micrel, Inc.
April 2007
Bit
15-0
Bit
15-0
Bit
15-0
Bit
15-2
1-0
Default Value
-
Default Value
-
Default Value
-
Default Value
-
0x0
R/W
RW
R/W
RW
R/W
RW
R/W
RO
RW
Description
MARL MAC Address Low
The least significant word of the MAC address.
Description
MARM MAC Address Middle
The middle word of the MAC address.
Description
MARH MAC Address High
The Most significant word of the MAC address.
Description
Reserved
OBSC On-Chip Bus Speed Control
00: 125MHz.
01: 62.5MHz.
10: 41.66MHz.
11: 25MHz.
Note: When external EEPROM is enabled, the bit 1 in Configparm word (0x6H) is used to
contol this speed as below:
Bit 1 = 0 , this value will be 00 for 125 MHz.
Bit 1 = 1 , this value will be 11 for 25 MHz.
(User still can write these two bits to change speed after EEPROM data loaded)
59
KSZ8862-16/32MQL
M9999-040407-3.0