LM3S2110-IQN20-A0 Luminary Micro, Inc., LM3S2110-IQN20-A0 Datasheet - Page 110

• Manufacturer Part Number: LM3S2110-IQN20-A0
• Description: Microcontroller
• Manufacturer: Luminary Micro, Inc.

Internal Memory
7
7.1
7.2
7.2.1
110
Internal Memory
The LM3S2110 microcontroller comes with 16 KB of bit-banded SRAM and 64 KB of flash memory.
The flash controller provides a user-friendly interface, making flash programming a simple task.
Flash protection can be applied to the flash memory on a 2-KB block basis.
Block Diagram
Figure 7-1. Flash Block Diagram
Functional Description
This section describes the functionality of both the flash and SRAM memories.
SRAM Memory
The internal SRAM of the Stellaris
map. To reduce the number of time consuming read-modify-write (RMW) operations, ARM has
introduced bit-banding technology in the Cortex-M3 processor. With a bit-band-enabled processor,
certain regions in the memory map (SRAM and peripheral space) can use address aliases to access
individual bits in a single, atomic operation.
The bit-band alias is calculated by using the formula:
SRAM Array
Cortex-M3
Bridge
System Bus
DCode
ICode
APB
Flash Protection
®
devices is located at address 0x2000.0000 of the device memory
FMPREn
FMPPEn
Preliminary
Flash Control
Flash Timing
USECRL
FCMISC
FCRIS
FCIM
FMD
FMC
FMA
User Registers
USER_REG0
USER_REG1
USER_DBG
November 29, 2007
Flash Array