LM3S8930 Luminary Micro, Inc, LM3S8930 Datasheet - Page 279

• Manufacturer Part Number: LM3S8930
• Description: Lm3s8930 Arm Microcontroller
• Manufacturer: Luminary Micro, Inc

July 25, 2008
Bit/Field
2
1
0
Name
PEN
BRK
EPS
Type
R/W
R/W
R/W
Reset
0
0
0
Preliminary
Description
UART Even Parity Select
If this bit is set to 1, even parity generation and checking is performed
during transmission and reception, which checks for an even number
of 1s in data and parity bits.
When cleared to 0, then odd parity is performed, which checks for an
odd number of 1s.
This bit has no effect when parity is disabled by the PEN bit.
UART Parity Enable
If this bit is set to 1, parity checking and generation is enabled; otherwise,
parity is disabled and no parity bit is added to the data frame.
UART Send Break
If this bit is set to 1, a Low level is continually output on the UnTX output,
after completing transmission of the current character. For the proper
execution of the break command, the software must set this bit for at
least two frames (character periods). For normal use, this bit must be
cleared to 0.
LM3S8930 Microcontroller
279