mc68hc908gp20 Freescale Semiconductor, Inc, mc68hc908gp20 Datasheet - Page 237

• Manufacturer Part Number: mc68hc908gp20
• Description: M68hc08 Family Of 8-bit Microcontroller Units Mcus
• Manufacturer: Freescale Semiconductor, Inc

MC68HC908GP20
Freescale Semiconductor
—
Rev 2.1
T1CH1 and T1CH0 — Timer 1 Channel I/O Bits
SPSCK — SPI Serial Clock
MOSI — Master Out/Slave In
MISO — Master In/Slave Out
SS — Slave Select
The PTD7/T1CH1–PTD6/T1CH0 pins are the TIM1 input
capture/output compare pins. The edge/level select bits, ELSxB and
ELSxA, determine whether the PTD7/T1CH1–PTD6/T1CH0 pins are
timer channel I/O pins or general-purpose I/O pins. See
Timer Interface Module
The PTD3/SPSCK pin is the serial clock input of the SPI module.
When the SPE bit is clear, the PTD3/SPSCK pin is available for
general-purpose I/O.
The PTD2/MOSI pin is the master out/slave in terminal of the SPI
module. When the SPE bit is clear, the PTD2/MOSI pin is available for
general-purpose I/O.
The PTD1/MISO pin is the master in/slave out terminal of the SPI
module. When the SPI enable bit, SPE, is clear, the SPI module is
disabled, and the PTD0/SS pin is available for general-purpose I/O.
Data direction register D (DDRD) does not affect the data direction of
port D pins that are being used by the SPI module. However, the
DDRD bits always determine whether reading port D returns the states
of the latches or the states of the pins. See
The PTD0/SS pin is the slave select input of the SPI module. When
the SPE bit is clear, or when the SPI master bit, SPMSTR, is set, the
PTD0/SS pin is available for general-purpose I/O. When the SPI is
enabled, the DDRB0 bit in data direction register B (DDRB) has no
effect on the PTD0/SS pin.
(TIM).
Table
16-5.
Advance Information
Section 22.
237