mpc8245ec Freescale Semiconductor, Inc, mpc8245ec Datasheet - Page 7

• Manufacturer Part Number: mpc8245ec
• Description: Mpc8245 Integrated Host Processor
• Manufacturer: Freescale Semiconductor, Inc

Freescale Semiconductor
PLL supply voltage—peripheral logic
PCI reference
Input voltage
Die-junction temperature
Notes:
1. These are the recommended and tested operating conditions. Proper device operation outside of these conditions is not
2. PCI pins are designed to withstand LV
3. PCI pins are designed to withstand LV
4. The voltage supply value of 1.8/1.9/2.0 V ± 100 mV applies to parts marked as having a maximum CPU speed of 266 and
5. The voltage supply value of 2.0/2.1 V ± 100 m V applies to parts marked as having a maximum CPU speed of 333 and 350
Cautions:
6. Input voltage (V
7. OV
8. V
9. GV
10.LV
11. LV
12.This voltage is the input to the filter discussed in
guaranteed.
300 MHz. See
the nominal value.
MHz. See
value.
during power-on reset. Input voltage (V
during power-on reset.
be exceeded for a maximum of 20 ms during power-on reset and power-down sequences.
be exceeded for a maximum of 20 ms during power-on reset and power-down sequences.
be exceeded for a maximum of 20 ms during power-on reset and power-down sequences.
exceeded for a maximum of 20 ms during power-on reset and power-down sequences.
for a maximum of 20 ms during power-on reset and power-down sequences.
at the AV
DD
DD
DD
DD
DD
/AV
must not exceed V
must not exceed OV
must not exceed V
must not exceed V
DD
DD
Table
/AV
pin, which may be reduced from V
DD
Table
in
7. For each chosen nominal value (2.0/2.1 V) the supply voltage should not exceed ± 100 mV of the nominal
2 must not exceed OV
) must not be greater than the supply voltage (V
7. For each chosen nominal value (1.8/1.9/2.0 V) the supply voltage should not exceed ± 100 mV of
Characteristic
DD
Table 2. Recommended Operating Conditions
MPC8245 Integrated Processor Hardware Specifications, Rev. 10
DD
DD
DD
/AV
/AV
/AV
by more than 3.0 V at any time, including during power-on reset. This limit may be exceeded
DD
DD
DD
/AV
/AV
/AV
DD
DD
DD
DD
DD
DD
in
2 by more than 5.4 V at any time, including during power-on reset. This limit may be
2 by more than 1.8 V at any time, including during power-on reset. This limit may
2 by more than 1.8 V at any time, including during power-on reset. This limit may
) must not be greater than GV
+ 5% V DC when LV
+ 0.5 V DC when LV
by more than 0.6 V at any time, including during power-on reset. This limit may
DD
Section 7.1, “PLL Power Supply Filtering,”
by the filter.
PCI inputs
All other inputs
DD
DD
DD
is connected to a 5.0-V DC power supply.
is connected to a 3.3-V DC power supply.
/AV
DD
DD
Symbol
AV
LV
/AV
/OV
V
T
DD
in
DD
j
DD
2
DD
1
2) by more than 2.5 V at all times, including
by more than 0.6 V at all times, including
(continued)
Recommended
1.8/1.9/2.0
0 to 3.6 or 5.75
2.0/2.1
Electrical and Thermal Characteristics
5.0 ± 5%
3.3 ± 0.3
0 to 105
0 to 3.6
Value
and not necessarily the voltage
V ±
V ±
Unit
°C
V
V
V
V
V
V
2, 10, 11
3, 10, 11
4, 7, 12
5, 7, 12
Notes
2, 3
6
7