tmp89fm42k TOSHIBA Semiconductor CORPORATION, tmp89fm42k Datasheet - Page 103

• Manufacturer Part Number: tmp89fm42k
• Description: 8 Bit Microcontroller Tlcs-870/c1 Series
• Manufacturer: TOSHIBA Semiconductor CORPORATION

RA000
8-bit up counter value
When WDCTR<WDTW> is “10”
Writing of 4EH (clear code)
Reading of WDST
Watchdog timer interrupt
request signal
WDST<WINTST1>
WDST<WINTST2>
for releasing the 8-bit up counter outside the clear time.
WDST<WINTST2> and WDST<WINTST1> in the watchdog timer interrupt service routine.
same time as the condition for turning WDST<WINTST2> or WDST<WINTST1> to "1" is satisfied,
WDST<WINTST2> or WDST<WINTST1> is set to "1", rather than being cleared.
WDST<WINTST1> is set to "1" when a watchdog timer interrupt request signal occurs due to the operation
You can know which factor has caused a watchdog timer interrupt request signal by reading
WDST<WINTST2> and WDST<WINTST1> are cleared to "0" when WDST is read. If WDST is read at the
0xFF 0x00 0x01
Figure 5-4 Changes in the Watchdog Timer Status
Interrupt request signal generated by clearing
the 8-bit up counter outside the clear time
Outside the clear time
0x3F
0x40
Page 85
0x7F 0x80
0xBF 0xC0
Clear time
0xFF 0x00
Interrupt request signal generated by the
overflow of the 8-bit up counter
0x01
TMP89FM42K