EPF10K10 ETC, EPF10K10 Datasheet - Page 5

• Manufacturer Part Number: EPF10K10
• Description: EMBEDDED PROGRAMMABLE LOGIC FAMILY
• Manufacturer: ETC

Altera Corporation
Notes to tables:
(1)
(2)
(3)
General
Description
Notes:
(1)
(2)
(3)
16-bit loadable
counter
16-bit accumulator
16-to-1 multiplexer
256
cycle speed
256
cycle speed
Table 6. FLEX 10K & FLEX 10KA Performance
Contact Altera Customer Marketing for up-to-date information on package availability.
FLEX 10K and FLEX 10KA device package types include plastic J-lead chip carrier (PLCC), thin quad flat pack
(TQFP), plastic quad flat pack (PQFP), power quad flat pack (RQFP), ball-grid array (BGA), pin-grid array (PGA),
and FineLine BGA
This option will be supported with a 256-pin FineLine BGA package. By using SameFrame pin migration, all
FineLine BGA packages are pin compatible. For example, a board can be designed to support both 256-pin and
484-pin FineLine BGA packages. The Quartus and MAX+PLUS II software automatically avoids conflicting pins
when future migration is set.
The speed grade of this application is limited because of clock high and low specifications.
This application uses combinatorial inputs and outputs.
This application uses registered inputs and outputs.
Application
8 RAM read
8 RAM write
(1)
(3)
(3)
(1)
(2)
TM
packages.
Resources
LEs
16
16
10
0
0
Used
Altera’s FLEX 10K devices are the industry’s first embedded PLDs. Based
on reconfigurable CMOS SRAM elements, the Flexible Logic Element
MatriX (FLEX) architecture incorporates all features necessary to
implement common gate array megafunctions. With up to 250,000 gates,
the FLEX 10K family provides the density, speed, and features to integrate
entire systems, including multiple 32-bit buses, into a single device.
FLEX 10K devices are reconfigurable, which allows 100
shipment. As a result, the designer is not required to generate test vectors
for fault coverage purposes. Additionally, the designer does not need to
manage inventories of different ASIC designs; FLEX 10K devices can be
configured on the board for the specific functionality required.
Table 6
performance values were obtained with Synopsys DesignWare or LPM
functions. No special design technique was required to implement the
applications; the designer simply inferred or instantiated a function in a
Verilog HDL, VHDL, Altera Hardware Description Language (AHDL), or
schematic design file.
EABs
0
0
0
1
1
shows FLEX 10K performance for some common designs. All
204
204
172
106
4.2
-1
FLEX 10K Embedded Programmable Logic Family Data Sheet
166
166
145
5.8
89
-2
Performance
Speed Grade
125
125
108
6.0
68
-3
testing prior to
7.0
95
95
84
63
-4
Units
MHz
MHz
MHz
MHz
ns
5