EP1C4 ALTERA [Altera Corporation], EP1C4 Datasheet - Page 27

• Manufacturer Part Number: EP1C4
• Description: Cyclone FPGA Family Data Sheet
• Manufacturer: ALTERA [Altera Corporation]

Figure 2–14. Shift Register Memory Configuration
Altera Corporation
January 2007
w
w
w
w
w × m × n Shift Register
m-Bit Shift Register
m-Bit Shift Register
m-Bit Shift Register
m-Bit Shift Register
register outputs (number of taps n × width w) must be less than the
maximum data width of the M4K RAM block (×36). To create larger shift
registers, multiple memory blocks are cascaded together.
Data is written into each address location at the falling edge of the clock
and read from the address at the rising edge of the clock. The shift register
mode logic automatically controls the positive and negative edge
clocking to shift the data in one clock cycle.
memory block in the shift register mode.
Memory Configuration Sizes
The memory address depths and output widths can be configured as
4,096 × 1, 2,048 × 2, 1,024 × 4, 512 × 8 (or 512 × 9 bits), 256 × 16 (or 256 × 18
bits), and 128 × 32 (or 128 × 36 bits). The 128 × 32- or 36-bit configuration
Figure 2–14
w
w
w
w
Embedded Memory
shows the M4K
n Number
of Taps
Preliminary
2–21