M58LT128HSB8ZA6 NUMONYX [Numonyx B.V], M58LT128HSB8ZA6 Datasheet - Page 44

• Manufacturer Part Number: M58LT128HSB8ZA6
• Manufacturer: NUMONYX [Numonyx B.V]

Read modes
7
7.1
44/110
Read modes
Read operations can be performed in two different ways depending on the settings in the
Configuration Register. If the clock signal is ‘don’t care’ for the data output, the Read
operation is asynchronous. If the data output is synchronized with clock, the Read operation
is synchronous.
The Read mode and format of the data output are determined by the Configuration Register.
(See
and Synchronous Read operations.
Asynchronous Read mode
In Asynchronous Read operations the clock signal is ‘don’t care’. The device outputs the
data corresponding to the address latched; that is the memory array, Status Register,
Common Flash Interface, or Electronic Signature depending on the command issued. CR15
in the Configuration Register must be set to ‘1’ for synchronous operations.
Asynchronous Read operations can be performed in two different ways, Asynchronous
Random Access Read and Asynchronous Page Read. Only Asynchronous Page Read
takes full advantage of the internal page storage so different timings are applied.
In Asynchronous Read mode a page of data is internally read and stored in a page buffer.
The page has a size of 4 words and is addressed by address inputs A0 and A1. The first
Read operation within the page has a longer access time (t
Subsequent reads within the same page have much shorter access times (t
access time). If the page changes, then the normal, longer timings apply again.
The device features an Automatic Standby mode. During Asynchronous Read operations,
after a bus inactivity of 150 ns, the device automatically switches to the Automatic Standby
mode. In this situation, the power consumption is reduced to the standby value and the
outputs are still driven.
In Asynchronous Read mode, the WAIT signal is always de-asserted.
See
access Read AC
details.
Table 22: Asynchronous Read AC
Section 6: Configuration Register
waveforms, and
Figure 10: Asynchronous Page Read AC waveforms
characteristics,
for details). All banks support both asynchronous
Figure 9: Asynchronous random
AVQV
M58LT128HST, M58LT128HSB
, random access time).
AVQV1
, page
for