TMP86C993XB Toshiba, TMP86C993XB Datasheet - Page 207

• Manufacturer Part Number: TMP86C993XB
• Description: EMULATION CHIP FOR TMP86F SSOP
• Manufacturer: Toshiba

Specifications of TMP86C993XB

• Accessory Type: Adapter
• For Use With/related Products: TMP86F SSOP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Description of the flash memory erasing mode
1. The 1st through 4th bytes of the transmitted and received data contain the same data as in the flash
2. The 5th byte of the received data contains the command data in the flash memory erasing mode (F0H).
3. When the 5th byte of the received data contains the operation command data shown in Table 19-6, the
4. The 7th thorough m'th bytes of the transmitted and received data contain the same data as in the flash
5. The n’th - 2 byte contains the erasure area specification data. The upper 4 bits and lower 4 bits specify
6. The n’th - 1 byte and n’th byte contain the upper and lower bytes of the checksum, respectively. For
7. After sending the checksum, the device waits for the next operation command data.
memory writing mode.
device echoes back the value which is the same data in the 6th byte position of the received data (in
this case, F0H). If the 5th byte of the received data does not contain the operation command data, the
device enters the halt condition after sending 3 bytes of the operation command error code (63H).
memory writing mode. In the case of a blank product, do not transmit a password string. (Do not transmit
a dummy password string.)
the start address and end address of the erasure area, respectively. For the detailed description, see
"19.13 Specifying the Erasure Area".
how to calculate the checksum, refer to "19.8 Checksum (SUM)". Checksum is calculated unless a
receiving error or Intel Hex format error occurs. After sending the end record, the external controller
judges whether the transmission is completed correctly by receiving the checksum sent by the device.
Page 193
TMP86FH92DMG