CDB5376 Cirrus Logic Inc, CDB5376 Datasheet - Page 11

• Manufacturer Part Number: CDB5376
• Description: EVALUATION BOARD FOR CS5376
• Manufacturer: Cirrus Logic Inc

Specifications of CDB5376

• Main Purpose: Seismic Evaluation System
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: CS3301A, CS3302A, CS4373A, CS5372A, CS5376A
• Primary Attributes: Quad Digital Filter
• Secondary Attributes: Graphical User Interface, SPI™ & USB Interfaces
• Processor To Be Evaluated: CS330x, CS4373A, CS537x
• Interface Type: USB
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant
• Other names: 598-1778

1.3
1.3.1
The PC hardware requirements for the Cirrus Seismic Evaluation system are:
•
•
•
•
•
1.3.2
Important: For reliable USB communication, the USBXpress
Evaluation Software installation but before launching the application. The USBXpress driver files are in-
cluded in a sub-folder as part of the installation.
To install the Cirrus Logic Seismic Evaluation Software:
•
•
•
•
•
An application note, AN271 - Cirrus Seismic Evaluation GUI Installation Guide, is available from the Cirrus
Logic web site with step-by-step instructions on installing the Seismic Evaluation Software.
1.3.3
Important: For reliable USB communication, the USBXpress driver must be installed after the Seismic
Evaluation Software installation but before launching the application. The USBXpress driver files are in-
cluded in a sub-folder as part of the installation.
The Cirrus Logic Seismic Evaluation Software communicates with CDB5376 via USB using the USBX-
press driver from Silicon Laboratories (http://www.silabs.com). For convenience, the USBXpress driver
files are included as part of the installation package.
To install the USBXpress driver (after installing the Seismic Evaluation Software):
•
DS612DB3
Windows XP
Intel
VGA resolution or higher video card
Minimum 64MB RAM
Minimum 40MB free hard drive space
Go to the Cirrus Logic Industrial Software web page (http://www.cirrus.com/industrialsoftware). Click
the link for “Cirrus Seismic Evaluation GUI” to get to the download page and then click the link for “Cir-
rus Seismic Evaluation GUI Release Vxx” (xx indicates the version number).
Read the software license terms and click “Accept” to download the “SeismicEvalGUI_vxx.zip” file to
any directory on the PC.
Unzip the downloaded file to any directory and a “Distribution\Volume1” sub-folder containing the in-
stallation application will automatically be created.
Open the “Volume1” sub-folder and run “setup.exe”. If the Seismic Evaluation Software has been pre-
viously installed, the uninstall wizard will automatically remove the previous version during install.
Follow the instructions presented by the Cirrus Seismic Evaluation Installation Wizard. The default in-
stallation location is “C:\Program Files\Cirrus Seismic Evaluation”.
Connect CDB5376 to the PC through an available USB port and apply power. The PC will detect
Software Setup
®
PC Requirements
Seismic Evaluation Software Installation
USBXpress Driver Installation
Pentium
®
, Windows 2000
®
600MHz or higher microprocessor
™
, Windows NT
®
®
driver must be installed after the Seismic
CDB5376
11