STEVAL-IAS001V1 STMicroelectronics, STEVAL-IAS001V1 Datasheet - Page 15

• Manufacturer Part Number: STEVAL-IAS001V1
• Description: BOARD EVAL ST7FLITE39/STM1403
• Manufacturer: STMicroelectronics

Specifications of STEVAL-IAS001V1

• Main Purpose: Reference Design, Security Keypad (MCU Based)
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: ST7FLITE39, STM1403
• Primary Attributes: 4x3 Key Matrix, Intrusion Detection
• Secondary Attributes: Graphical User Interface, RS-232 Interface
• Processor To Be Evaluated: ST7LITE39F2
• Interface Type: RS-232
• Silicon Manufacturer: ST Micro
• Silicon Core Number: ST7Lite39F2 And STM1403
• Kit Application Type: Reference Design
• Application Sub Type: Security Keypad
• Kit Contents: Board CD Docs
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-6398; STEVAL-IAS001V1

UM0408
2.4
2.4.1
Note:
1.
2.
3.
4.
5.
6.
Administrator mode through PC graphical user interface
Connecting to the PC
Connect the RS232 serial cable between the demonstration board and the PC and power on
the board.
Even if the board is connected with the RS232 serial cable with power on, the system enters
the GUI mode as soon as the administrator password is entered in the login window. You
need to make sure that the system is not in the process of executing another command at
this time, otherwise unexpected behavior is possible.
Press the
The red error LED starts to flash, indicating that you are in administrator reset
password mode.
Enter "12345", within 1 minute.
–
–
–
Press the
–
–
–
Press the
The red error LED flashes 6 times.
Enter "54321", within 1 minute.
–
–
–
Press the
–
–
–
If correctly entered, the red error LED flashes 6 times.
If incorrectly entered, the red error LED glows for approximately 12 seconds. After
this the system exits admin reset password mode.
If nothing entered within the 1 minute, the red error LED glows for approximately
12 seconds. After this the system exits from admin reset password mode.
If
If an incorrect key is pressed, the red error LED glows for approximately 12
seconds. After this the system exits from admin reset password mode.
If no key is pressed within 1 minute, the red error LED glows for approximately 12
seconds. After this the system exits from admin reset password mode.
If a correct entry is made, the red error LED flashes 6 times.
If an incorrect entry, the red error LED glows for approximately 12 seconds. After
this the system exits from admin reset password mode.
If nothing is entered within 1 minute, the red error LED glows for approximately 12
seconds. After this the system exits from admin reset password mode.
If
"00000". The red error LED flashes 18 times. The system exists from the admin
reset password mode.
If an incorrect key is pressed, the red error LED glows for approximately 12
seconds. The administrator password is not reset and the system exits from admin
reset password mode.
If no key is pressed within 1 minute, the red error LED glows for approximately 12
seconds. The administrator password is not reset and the system exits from admin
reset password mode.
#
#
is pressed, the red error LED flashes 18 times.
is pressed, this is confirmation for the administration password reset to
#
#
#
#
key.
key, within 1 minute.
key.
key, within 1 minute.
Running the security door application
15/27