DS26528DK Maxim Integrated Products, DS26528DK Datasheet - Page 62

• Manufacturer Part Number: DS26528DK
• Description: KIT DESIGN FOR DS26528
• Manufacturer: Maxim Integrated Products

Specifications of DS26528DK

• Main Purpose: Telecom, Framer and Line Interface Units (LIUs)
• Utilized Ic / Part: G575DS26528
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Secondary Attributes: -
• Embedded: -
• Primary Attributes: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Table 8-26. E1 Line Code Violation Counting Options
8.9.9.2 Path Code Violation Count Register (PCVCR)
In T1 operation, the Path Code Violation Count register (PCVCR) records either Ft, Fs, or CRC-6 errors. When the
receive side of a framer is set to operate in the T1 ESF framing mode, PCVCR records errors in the CRC-6
codewords. When set to operate in the T1 D4 framing mode, PCVCR counts errors in the Ft framing bit position.
Via the ERCNT.2 bit, a framer can be programmed to also report errors in the Fs framing bit position. PCVCR is
disabled during receive loss of synchronization (RLOF = 1) conditions. See
exactly what errors the PCVCR counts in T1 operation.
In E1 operation, PCVCR records CRC-4 errors. Since the maximum CRC-4 count in a one-second period is 1000,
this counter cannot saturate. The counter is disabled during loss of sync at either the FAS or CRC-4 level; it
continues to count if loss of multiframe sync occurs at the CAS level.
The Path Code Violation Count Register 1 (PCVCR1) is the most significant word and Path Code Violation Count
Register 2 (PCVCR2) is the least significant word of a 16-bit counter that records path violations (PVs).
Table 8-27. T1 Path Code Violation Counting Arrangements
8.9.9.3 Frames Out of Sync Count Register (FOSCR)
The FOSCR is used to count the number of multiframes that the receive synchronizer is out of sync. This number is
useful in ESF applications needing to measure the parameters loss of frame count (LOFC) and ESF error events
as described in AT&T publication TR54016. When the FOSCR is operated in this mode, it is not disabled during
receive loss of synchronization (RLOF = 1) conditions. The FOSCR has an alternate operating mode whereby it will
count either errors in the Ft framing pattern (in the D4 mode) or errors in the FPS framing pattern (in the ESF
mode). When the FOSCR is operated in this mode, it is disabled during receive loss of synchronization (RLOF = 1)
conditions. See
In E1 mode, the FOSCR counts word errors in the frame alignment signal in time slot 0. This counter is disabled
when RLOF is high. FAS errors will not be counted when the framer is searching for FAS alignment and/or
synchronization at either the CAS or CRC-4 multiframe level. Since the maximum FAS word error count in a one-
second period is 4000, this counter cannot saturate.
The Frames Out of Sync Count Register 1 (FOSCR1) is the most significant word and Frames Out of Sync Count
Register 2 (FOSCR2) is the least significant word of a 16-bit counter that records frames out of sync.
Table 8-28. T1 Frames Out of Sync Counting Arrangements
E1 CODE VIOLATION SELECT
FRAMING MODE
FRAMING MODE
(RCR1.5)
ESF
D4
D4
ESF
ESF
D4
D4
(ERCNT.0)
0
1
Table 8-28
COUNT Fs ERRORS?
COUNT MOS OR F-BIT ERRORS
for a detailed description of what the FOSCR is capable of counting.
Don’t Care
Yes
No
(ERCNT.1)
MOS
MOS
F-Bit
F-Bit
WHAT IS COUNTED IN
LCVCR1,
62 of 276
BPVs
CVs
Errors in both the Ft and Fs patterns
Errors in the CRC-6 codewords
LCVCR2
WHAT IS COUNTED IN
Errors in the Ft pattern
PCVCR1,
Number of multiframes out of sync
Number of multiframes out of sync
PCVCR2
Table 8-27
Errors in the FPS pattern
WHAT IS COUNTED IN
DS26528 Octal T1/E1/J1 Transceiver
Errors in the Ft pattern
FOSCR1,
for a detailed description of
FOSCR2