HW-SD1800A-DSP-SB-UNI-G Xilinx Inc, HW-SD1800A-DSP-SB-UNI-G Datasheet - Page 29

• Manufacturer Part Number: HW-SD1800A-DSP-SB-UNI-G
• Description: KIT DEVELOPMENT SPARTAN 3ADSP
• Manufacturer: Xilinx Inc
• Series: Spartan™-3A DSPr
• Type: DSPr

Specifications of HW-SD1800A-DSP-SB-UNI-G

• Contents: Development Platform, Power Supply and software
• Silicon Manufacturer: Xilinx
• Features: 10/100/1000 PHY, JTAG Programming And Configuration Port
• Silicon Family Name: Spartan-3A
• Silicon Core Number: 3SD1800A-FG676
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: Spartan 3A
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 122-1574; HW-SD1800A-DSP-DB-UNI-G; HW-SD1800A-DSP-DB-UNI-G; HW-SD1800A-DSP-SB-UNI-G

Spartan-3A DSP Starter Platform User Guide
UG454 (v1.1) January 30, 2009
Configuration Modes
R
X-Ref Target - Figure 9
The following table shows the Spartan-3A DSP configuration modes set by Jumper JP9. All
mode jumpers (including the PUDC_B pin) are pulled up; jumper installation grounds the
connection.
configuration settings at JP9.
FPGE; however, only BPI, SPI and JTAG modes are supported on the Spartan-3A DSP
Starter Platform.
Pushing the button connects PROG to ground. Upon releasing the button, a re-
configuration is initiated based upon the setting of JP9. A blue LED (D1) should light when
FPGA DONE is asserted. A jumper (JP7) connects PROG to ground; this will be used
during Direct SPI programming of the SPI flash.
A push button labeled PROG is connected to the FPGA PROG pin and pulled up.
Figure 10
J2
J4
depicts configuration jumper JP9;
Figure 9: Configuration Connectors
www.xilinx.com
Table 18
shows all possible modes for a Spartan-3A DSP
Table 19
UG454_09_050908
provides the various
Configuration
53