101-1226 Rabbit Semiconductor, 101-1226 Datasheet - Page 17

RCM3900 DEV KIT UNIVERSAL

101-1226

Manufacturer Part Number
101-1226
Description
RCM3900 DEV KIT UNIVERSAL
Manufacturer
Rabbit Semiconductor
Series
RabbitCore 3900r
Type
MPU Moduler
Datasheet

Specifications of 101-1226

Contents
RabbitCore Module, Dev. Board, AC Adapter, Cable and Dynamic C® CD-Rom
For Use With/related Products
RCM3900
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
316-1137
2.3 Starting Dynamic C
Once the RCM3900 is connected as described in the preceding pages, start Dynamic C by
double-clicking on the Dynamic C icon on your desktop or in your
uses the serial port specified during installation. Select
RAM
click on the “Communications” tab and verify that
selected to support the USB programming cable. Click
This program shows that the CPU is working. The sample program described in
Section 6.5, “Run the PINGME.C Sample Program,” tests the TCP/IP portion of the board.
2.4 Run a Sample Program
Use the
SAMPLES
window will open on your PC and will display a small square bouncing around in a box.
2.4.1 Troubleshooting
If Dynamic C cannot find the target system (error message
Detected."
• Check that the RCM3900 is powered correctly — the red
• Check both ends of the programming cable to ensure that they are firmly plugged into
• Ensure that the RCM3900 module is firmly and correctly installed in its connectors on
• Select a different COM port within Dynamic C. From the
• If you get an error message when you plugged the programming cable into a USB port,
RabbitCore RCM3900 User’s Manual
ing Board should be lit when the RCM3900 is mounted on the Prototyping Board and
the AC adapter is plugged in.
the PC and the
ming port on the RCM3900 with the marked (colored) edge of the programming cable
towards pin 1 of the programming header.
the Prototyping Board.
ect Options
then click
you will have to install USB drivers. Drivers for Windows XP are available in the
Dynamic C
double-click
systems are available online at www.ftdichip.com/Drivers/VCP.htm.
on the “Compiler” tab in the Dynamic C
File
folder. Press function key
menu to open the sample program
OK
):
Drivers\Rabbit USB Programming Cable\WinXP_2K
, then select another COM port from the list on the
DPInst.exe
. Press
PROG
<Ctrl-Y>
connector, not the
to install the USB drivers. Drivers for other operating
to force Dynamic C to recompile the BIOS.
F9
to compile and run the program. The
DIAG
Options > Project Options
PONG.C
connector, is plugged in to the program-
Use USB to Serial Converter
Code and BIOS in Flash, Run in
OK
, which is in the Dynamic C
.
"No Rabbit Processor
CORE
Options
Start
Communications
LED on the Prototyp-
menu, select
menu. Dynamic C
menu. Then
STDIO
folder —
is
Proj-
tab,
17

Related parts for 101-1226