101-1226 Rabbit Semiconductor, 101-1226 Datasheet - Page 22

• Manufacturer Part Number: 101-1226
• Description: RCM3900 DEV KIT UNIVERSAL
• Manufacturer: Rabbit Semiconductor
• Series: RabbitCore 3900r
• Type: MPU Moduler

Specifications of 101-1226

• Contents: RabbitCore Module, Dev. Board, AC Adapter, Cable and Dynamic C® CD-Rom
• For Use With/related Products: RCM3900
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 316-1137

RabbitCore RCM3900 User’s Manual
Note that this sample program does not use the optimum method of writing to the
NAND flash. The inefficiency resulting from the small amount of data written in each
append operation is offset somewhat by the expected relative infrequency of these
writes, and by the sample program’s method of “walking” through the flash blocks
when appending data as well as when a log is cleared.
There is little difference in the number of NAND flash block erase operations regard-
less of whether the
slightly more efficient to have the NAND flash driver use larger (16K) chunks of data.
See the
As long as you have not modified the
enter the following server address in your Web browser to bring up the Web page
served by the sample program.
Otherwise use the TCP/IP settings you entered in the
library.
Follow these instructions to set up your PC or notebook. Check with your administra-
tor if you are unable to change the settings as described here since you may need
administrator privileges. The instructions are specifically for Windows 2000, but the
interface is similar for other versions of Windows.
1. Go to the control panel (
2. Select the network interface card used for the Ethernet interface you intend to use
3. Now select the
4. Click <OK> or <Close> to exit the various dialog boxes.
http://10.10.6.100
the Network icon.
(e.g.,
ties” button. Depending on which version of Windows your PC is running, you may
have to select the “Local Area Connection” first, and then click on the “Properties”
button to bring up the Ethernet interface dialog. Then “Configure” your interface
card for a “10Base-T Half-Duplex” or an “Auto-Negotiation” connection on the
“Advanced” tab.
and click on “Properties” to assign an IP address to your computer (this will disable
“obtain an IP address automatically”):
nf_initDevice()
TIP: If you are using a PC that is already on a network, you will disconnect the PC
NOTE: Your network interface card will likely have a different name.
IP Address : 10.10.6.101
Netmask : 255.255.255.0
Default gateway : 10.10.6.1
TCP/IP Xircom Credit Card Network Adapter
from that network to run these sample programs. Write down the existing settings
before changing them to facilitate restoring them when you are finished with the
sample programs and reconnect your PC to the network.
IP Address
NFLASH_USEERASEBLOCKSIZE
Start > Settings > Control Panel
function help for more information.
tab, and check
TCPCONFIG 1
Specify an IP Address
LIB\TCPIP\TCP_CONFIG.LIB
macro to 0 (zero) or 1 (one). It is
macro in the sample program,
) and click on the “Proper-
), and then double-click
, or select TCP/IP
22