101-1108 Rabbit Semiconductor, 101-1108 Datasheet - Page 61
![KIT EMBEDDED PLC APPLICATION](/photos/9/22/92224/101-1108_sml.jpg)
101-1108
Manufacturer Part Number
101-1108
Description
KIT EMBEDDED PLC APPLICATION
Manufacturer
Rabbit Semiconductor
Series
Coyoter
Type
MPU Moduler
Datasheet
1.101-1108.pdf
(70 pages)
Specifications of 101-1108
Contents
BL2500, ISaGRAF V3.50, Embedded PLC software kernel, ISaGRAF Programming Cable and Documentation
Processor To Be Evaluated
Rabbit 3000
Interface Type
RS-232, Ethernet
For Use With/related Products
BL2500
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Other names
316-1120
EMBEDDED
7.2 FAQ
Q1. What happens if I try to load the
Q2. Which are the Modbus function codes supported by
Q3. How can I change the assigned serial port number to the RS-232-to-USB converter cable on
Q4. Can I use the other serial ports on the BL2500 from an ISaGRAF application?
Q5. Can I have 2 analog outputs instead of 1 analog input and 1 analog output?
Q6. Can I use RabbitNet with
Q7. Do I need to keep the programming cable connected to the Target all the time?
OEM Technology Solutions
licensed
The
new license is required after a Kernel is loaded to a Target. This means that after loading a new
Kernel to a Target, a new User Reference Code is generated and you will need to contact OEM
Technology Solutions or your local distributor to obtain a new license key to activate the
PLC Kernel.
The
These are the function codes supported by ISaGRAF (see Section C.8.2 of [2]).
Windows XP?
Open Control Panel → System. Click on Device Manager. On the Device Manager window
expand the Ports (COM & LPT) category and select the USB Serial Port (COMx). Select Action →
Properties on the menu bar. On the USB Serial Port (COMx) Properties window click on Port
Setting tab and click on Advanced… On the Advanced window change the COM port number to
within COM1 to COM4 range. For more information about device settings contact your local system
administrator.
The
(serial port D) to communicate with the ISaGRAF Workbench or Modbus master. Contact OEM
Technology Solutions or your local
for the
The
information about custom I/O configuration on the
Solutions of your local
In Version 1.04 of the
Technology Solutions or your local
implemented in upcoming versions.
No. The programming DIAG cable is used only for entering license key or Target configuration
parameters values. After that it can be disconnected.
EMBEDDED
EMBEDDED
EMBEDDED
EMBEDDED
PLC BL2500 User’s Manual
EMBEDDED
EMBEDDED
PLC Utility does not check for an existing license before performing a loading and a
PLC BL2500 supports the following Modbus function code:
PLC Firmware Kernel Version 1.04 uses one RS232 (serial port E) or one RS485
PLC Firmware Kernel Version 1.04 has the analog I/O configuration fixed. For more
PLC Kernel.
PLC Kernel?
1
3
5
6
16
EMBEDDED
EMBEDDED
EMBEDDED
read N bits
read N words
write 1 bit
write 1 word
write N words
PLC BL2500 BSP RabbitNet is not supported. Contact OEM
PLC distributor.
EMBEDDED
EMBEDDED
EMBEDDED
PLC BL2500?
PLC Firmware Kernel to a Target already running a
PLC distributor for information about custom solutions
PLC distributor for information about features to be
EMBEDDED
EMBEDDED
PLC BL2500 contact OEM Technology
PLC?
FAQ and Troubleshooting
EMBEDDED
Page 55