PG-FP5-EA Renesas Electronics America, PG-FP5-EA Datasheet - Page 26

• Manufacturer Part Number: PG-FP5-EA
• Description: PROGRAMMER FLASH MEMORY UNIV
• Manufacturer: Renesas Electronics America

Specifications of PG-FP5-EA

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PG-FP5
3.2.1
3.2.2
machine via the USB interface. When the FP5 is connected to the USB port on the host machine for the first time, the
operating system automatically detects the FP5 by Plug and Play and the Welcome to the “Found New Hardware Wizard”
will start.
installation can be performed in the same manner.
R20UT0008EJ0400 Rev. 4.00
Jul 15, 2010
C:\
The folder configuration after programming GUI installation is as follows.
(2) You might be asked to reboot your computer after installing the PG-FP5. Be sure to close all other applications
(3) You must have administrator privileges to install the PG-FP5.
(4) The PG-FP5 can only be installed in a folder that is named using ASCII characters. (Note that the 11 characters /
(5) The PG-FP5 cannot be installed from a network drive or on a network drive.
(6) The installer does not specify environment variable paths. If these paths are required, add them after installation.
(7) The help feature was created using HTML Help files. If the help feature is not operating correctly, make sure you
The USB driver must be installed after installation of the programming GUI when connecting the FP5 and the host
In this section, displays of Windows XP are used for explanation. Displays are different when using Windows 2000, but
(1) Start up the host machine.
(2) Use a USB cable to connect the FP5 to the host machine, plug in the AC adapter and the AC adapter to the FP5
(3) Press the POWER button on the FP5; the POWER LED will then turn on and “Command >” is displayed in the
(4) The following window appears. Select “No, not this time” and click the Next > button.
(1) Multiple versions of the PG-FP5 can be installed on a single host machine. Although we recommend using the
\Program Files
latest version of any development tool, leaving a previous version on your host machine and then installing the
latest version lets you easily switch the development environment.
before rebooting your computer.
* : < > ? | " \ ; , and character strings that begin and end with a space cannot be used.) The PG-FP5 might not
operate correctly if installed in a folder that is named using other characters.
are using Microsoft Internet Explorer 5.0 or later (5.5 SP2 or later is recommended).
power supply connector.
message display.
Notes on installation
Installation of USB driver
\NEC Electronics Tools
\PG-FP5
\V2.00
\V2.10
\bin
\doc
\driver
[FP5.exe]
\FP5_PRJ
Folder structure for which installation is specified
Folder where documents are stored
Folder where programming GUI is stored
Folder where USB driver is stored
Folder where PR5 files and ESF files are stored
CHAPTER 3 SOFTWARE INSTALLATION
Page 26 of 240