PG-FP5-EA Renesas Electronics America, PG-FP5-EA Datasheet - Page 71

• Manufacturer Part Number: PG-FP5-EA
• Description: PROGRAMMER FLASH MEMORY UNIV
• Manufacturer: Renesas Electronics America

Specifications of PG-FP5-EA

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PG-FP5
R20UT0008EJ0400 Rev. 4.00
Jul 15, 2010
(4) [Verify] command
(5) [Read] command
The progress status of this command is displayed as a percentage in the action log window. When execution of
this command is completed, the programming GUI displays the result of command execution in the target device.
The [Read] command loads data on the flash memory in the target device and saves it as a file. When the [View]
command is executed following this command, 4 KB read data is displayed in the log window each time the
ENTER key is pressed. When the [Write Intel HEX file] or [Write Motorola SREC file] command is executed
following this command, the read data can be saved in the Intel HEX format or Motorola HEX format. Use of the
saved file with other tool products is not supported.
Remark
Caution The [Read] command is available only when using a single-power-supply flash memory
Figure 4-40. Program Data Saved Dialog <When Write Intel HEX file Command Is Executed>
The [Verify] command transmits the memory contents (program files) in the FP5 valid programming area to
the target device, verifies the data written to the flash memory in the target device, and receives the result.
The target area can be set in the [Operation Mode] area on the [Standard] tab in the Device Setup dialog box.
The folder in which program data was saved the last time is displayed in the program data save dialog
box.
microcontroller that supports the [Read] command.
CHAPTER 4 PROGRAMMING GUI USAGE
Page 71 of 240