101-0954 Rabbit Semiconductor, 101-0954 Datasheet - Page 15

• Manufacturer Part Number: 101-0954
• Description: KIT DEV RABBIT RCM3360/3370 INTL
• Manufacturer: Rabbit Semiconductor
• Series: RabbitCore 3000r

Specifications of 101-0954

• For Use With/related Products: RCM3360
• Lead Free Status / RoHS Status: Vendor undefined / Vendor undefined

2.2.2 Connect Programming Cable
The programming cable connects the RCM3360/RCM3370 to the PC running Dynamic C
to download programs and to monitor the RCM3360/RCM3370 module during debugging.
Connect the 10-pin connector of the programming cable labeled
the RCM3360/RCM3370 module as shown in Figure 3. There is a small dot on the circuit
board next to pin 1 of header J1. Be sure to orient the marked (usually red) edge of the
cable towards pin 1 of the connector. (Do not use the
nonprogramming serial connection.)
Connect the other end of the programming cable to a COM port on your PC.
User’s Manual
NOTE: Be sure to use the programming cable (part number 101-0542) supplied with this
NOTE: Some PCs now come equipped only with a USB port. It may be possible to use
Development Kit—the programming cable has blue shrink wrap around the RS-232 con-
verter section located in the middle of the cable. Programming cables with clear or red
shrink wrap from other Z-World or Rabbit Semiconductor kits were not designed to
work with RCM3360/RCM3370 modules.
an RS-232/USB converter (Z-World Part No. 540-0070) with the programming cable
supplied with the Development Kit. An RS-232/USB converter is available through the
Z-World Web store.
Figure 3. Connect Programming Cable and Power Supply
DIAG
connector, which is used for a
PROG
to header J1 on
9