P2CF-08-E Omron, P2CF-08-E Datasheet - Page 31

• Manufacturer Part Number: P2CF-08-E
• Description: SOCKET 8-PIN FOR H3CR-H
• Manufacturer: Omron
• Type: Socketr

Specifications of P2CF-08-E

• Number Of Positions: 8
• Mounting Type: DIN Rail
• Termination Style: Screw Terminal
• Size: 70 mm x 50 mm x 19 mm
• Socket Mounting: DIN Rail
• Socket Terminals: Screw
• Voltage Rating: 240VAC
• No. Of Pins: 8
• Accessory Type: Finger Safe Terminal
• Rohs Compliant: Yes
• Number Of Poles: 8
• Mounting Style: DIN Rail
• For Use With/related Products: Multiple Series
• For Use With: Z3000 - RELAY TIMER DGTL SPDT 12-24VDCZ2999 - RELAY TIMER DGTL SPDT 100/240VACH3CR-A8E AC100-240/DC100-125 - RELAY ANALOG SET DPDT 8PINZ2815 - RELAY REPEAT CYCLE ANALOG 30HRSZ2387 - RELAY TIMER 0-12SEC OFF-DELAYZ2386 - RELAY TIMER 0-12MIN OFF-DELAYZ2385 - RELAY REPEAT CYCLE ANALOG 30HRSZ2384 - RELAY REPEAT CYCLE ANALOG 300HRSZ2381 - RELAY ANALOG SET DPDT 8PINZ2380 - RELAY ANALOG SET DPDT 8PINZ2379 - RELAY ANALOG SET DPDT 8PINZ2382 - RELAY REPEAT CYCLE ANLG 30HRS
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: P2CF-08-E; P2CF08E; Z2836

■ Operation in Timer/Twin Timer Selection Mode
Select whether the H5CX is used as a timer or a twin timer in timer/twin timer selection mode. The H5CX is also equipped with a DIP switch monitor
function, a convenient function that enables the settings of the DIP switch pins to be confirmed using the front display.
Note 1. When the mode is changed to timer/twin timer selection mode, the present value is reset and output turns OFF. Timing operation is not
2. Setting changes made in timer/twin timer selection mode are enabled when the mode is changed to run mode. If settings are changed, the
performed in timer/twin timer selection mode.
HC5X is automatically reset (present value initialized, output turned OFF).
Power ON
1 s min.
+
1
Timer/Twin
timer selection
DIP switch
monitor
To change the mode to timer/twin timer selection mode, hold
down the
The
If the
Select either timer operation or twin timer operation
using the
Note: The H5CX is factory-set for timer operation.
Confirm the status of DIP switch pins 1 to 8 using
the
Note 1. This display is not supported with H5CX-L8@.
OFF
ON
(Timer)
MODE
2. This display is only possible when DIP switch pin 1
Example
(DIP switch settings enable/disable) is set to ON
(enable).
1
key must be pressed before the
key is pressed first, the mode will not change.
keys.
1
1
(Twin timer)
key for 1 s min. with the
2
keys.
3
4
5
6
7
8
MODE
1
key held down.
key.
Indicates that DIP switch pin 8 is ON.
Indicates that DIP switch pin 7 is OFF.
Indicates that DIP switch pin 6 is ON.
Indicates that DIP switch pin 5 is OFF.
Indicates that DIP switch pin 4 is ON.
Indicates that DIP switch pin 3 is OFF.
Indicates that DIP switch pin 2 is ON.
Indicates that DIP switch pin 1 is ON.
H5CX-A/-L
1
31