ST10F276-6Q3 STMicroelectronics, ST10F276-6Q3 Datasheet - Page 49

• Manufacturer Part Number: ST10F276-6Q3
• Description: MCU 16BIT 832K FLASH 144-PQFP
• Manufacturer: STMicroelectronics
• Series: ST10r

Specifications of ST10F276-6Q3

• Core Processor: ST10
• Core Size: 16-Bit
• Speed: 64MHz
• Connectivity: ASC, CAN, EBI/EMI, I²C, SSC, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 111
• Program Memory Size: 832KB (832K x 8)
• Program Memory Type: FLASH
• Ram Size: 68K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 24x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 144-MQFP, 144-PQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

ST10F276E
Figure 5.
UART BOOT
No
No
No
Address = Address + 1
[Address] = S0RBUF
Send acknowledge
ST10F276E new standard bootstrap loader program flow
Address = FA60h?
Other than after a normal reset the watchdog timer is disabled, so the bootstrap loading
sequence is not time limited. Depending on the selected serial link (UART0 or CAN1), pin
TxD0 or CAN1_TxD is configured as output, so the ST10F276E can return the acknowledge
byte. Even if the internal IFLASH is enabled, a code cannot be executed from it.
UART0 RxD = 1?
Address = FA40h
Falling-edge on
Initialize UART
Byte received?
Stop timer T6
Start timer T6
UART0 RxD?
START
UART BOOT
No
Yes
Jump to address FA40h
Address = FA40h
UART RxD = 0?
CAN1 RxD = 1?
CAN1 RxD = 1?
Falling-edge on
Start timer PT0
Stop timer PT0
CAN RxD = 0?
Initialize CAN
CAN1 RxD?
Count += 1
Count = 5?
PT0 > 20?
Count = 1
CAN BOOT
No
No
No
No
No
No
CAN BOOT
[Address] = MO15_data0
Address = Address + 1
Glitch on CAN1 RxD
Message received?
Address = FAC0h?
Clear timer PT0
Stop timer PT0
Bootstrap loader
No
No
49/231