101-1272 Rabbit Semiconductor, 101-1272 Datasheet - Page 105

• Manufacturer Part Number: 101-1272
• Description: KIT MESH NETWORK ADD-ON RCM4510W
• Manufacturer: Rabbit Semiconductor
• Type: Microprocessorr

Specifications of 101-1272

• Product: Modules
• Data Bus Width: 12 bit
• Processor Type: Rabbit 4000
• Sram: 512 KB
• Number Of I/os: 20
• Description/function: Computer Module
• Interface Type: Ethernet
• For Use With/related Products: RCM4510W
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• Other names: 316-1158

2.85 V and 3.00 V, typically 2.93 V. Since the RCM4510W will operate at voltages as low as
3.0 V, exercise care when operating close to the 3.0 V minimum voltage (for example, keep
the power supply as close as possible to the RCM4510W) since your RCM4510W could
reset unintentionally.
The RCM4510W has a reset output, pin 3 on header J1.
C.1.4 XBee RF Module Power Supply
The XBee RF module is isolated from digital noise generated by other components by way
of a low-pass filter composed of L5 and C90 on the RCM4510W as shown in Figure C-3.
The filtered power supply powers the XBee RF module, and is available via pin 8 of auxil-
iary I/O header J4 on the RCM4510W module. If you draw on this filtered power supply, the
maximum current draw is 25 mA.
Figure C-3. XBee RF Module Supply Circuit
C.2 Powerdown Mode
The XBee RF module can power down the remaining RCM4510W circuitry via the
or the
Dynamic C function calls. The real-time
zb_Rabbit_poweroff()
xb_sleep()
clock and the data SRAM will still be powered during the powerdown from the +3.3 V
DC supplied to the RCM4510W module via header J1 as long as that voltage exceeds the
voltage of the backup battery.
User’s Manual
99