101-1272 Rabbit Semiconductor, 101-1272 Datasheet - Page 67

• Manufacturer Part Number: 101-1272
• Description: KIT MESH NETWORK ADD-ON RCM4510W
• Manufacturer: Rabbit Semiconductor
• Type: Microprocessorr

Specifications of 101-1272

• Product: Modules
• Data Bus Width: 12 bit
• Processor Type: Rabbit 4000
• Sram: 512 KB
• Number Of I/os: 20
• Description/function: Computer Module
• Interface Type: Ethernet
• For Use With/related Products: RCM4510W
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• Other names: 316-1158

6.2.2 Setting up Sample Programs
The sample programs are set up so that the RCM4510W module you are using is a ZigBee
end device, router, or coordinator. Uncomment the line corresponding to the role the
RCM4510W will have once it is running the sample program. The default described in the
sample programs is for the RCM4510W module to be either a router (shown below) or an
end device.
There are several macros that may be changed to facilitate your setup. The macros can be
included as part of the program code, or they may be put into the Program Options
“Defines” on the “Defines” tab in the
User’s Manual
Extended PAN ID — the 64-bit network ID.
Defaults to
Dynamic C
XBEE_API.LIB
to
default used on the Digi
If set to
random extended PAN ID,” and tells routers
and end devices to “join any network.”
Change the extended PAN ID if you are
developing simultaneously with more than
one ZigBee coordinator.
Channel mask — defaults to 0x1FFE, i.e., all 12 possible channels via the macro in the
Dynamic C
15 for campatibility with the XBee PRO.)
#define DEFAULT_EXTPANID
"0x0123456789abcdef"
0x0123456789abcdef
// Set XBEE_ROLE to NODE_TYPE_COORD, NODE_TYPE_ROUTER or NODE_TYPE_ENDDEV
//
#define XBEE_ROLE
NOTE: Remember that the firmware loaded to the XBee RF module is different depend-
#define DEFAULT_CHANNELS XBEE_DEFAULT_CHANNELS
0x00
ing on whether the RCM4510 W is an end device/router (default) or a coordinator. See
Appendix D, “Additional Configuration Instructions,” for information on how to
download firmware to the RCM4510W module to set it up as a coordinator or to
resume its original configuration as a router (ZigBee PRO) or an end device/
router (ZNet 2.5).
to
DEFAULT_PANID
LIB\Rabbit4000\XBee\
, tells coordinators to “select a
match your XBee's firmware.
LIB\Rabbit4000\XBee\XBEE_API.LIB
library, otherwise defaults
ZB
®
XBee USB.
to match the
if set in the
NODE_TYPE_ROUTER
Options > Program Options
PAN ID — the network ID. Defaults to
0x0234 via the macro in the Dynamic C
LIB\Rabbit4000\XBee\XBEE_API.LIB
library. Change the PAN ID if you are
developing simultaneously with more than
one ZigBee coordinator.
#define DEFAULT_PANID 0x0234
library. (Do not use bits 14 and
ZNet 2.5
menu.
61