IDT82V3355TF IDT, Integrated Device Technology Inc, IDT82V3355TF Datasheet - Page 104

• Manufacturer Part Number: IDT82V3355TF
• Manufacturer: IDT, Integrated Device Technology Inc

Specifications of IDT82V3355TF

• Function: Wan PLL
• Operating Temperature (max): 85C
• Operating Temperature (min): -40C
• Package Type: TQFP
• Pin Count: 64
• Mounting: Surface Mount
• Lead Free Status / Rohs Status: Not Compliant

6.2.8
OUT2_FREQ_CNFG - Output Clock 2 Frequency Configuration
Programming Information
IDT82V3355
Address: 6DH
Type: Read / Write
Default Value: 00001000
OUT2_PATH_S
7 - 4
3 - 0
Bit
EL3
7
OUTPUT CONFIGURATION REGISTERS
OUT2_PATH_SEL[3:0]
OUT2_DIVIDER[3:0]
OUT2_PATH_S
Name
EL2
6
OUT2_PATH_S
These bits select an input to OUT2.
0000 ~ 0011: The output of T0 APLL. (default: 0000)
0100: The output of T0 DPLL 77.76 MHz path.
0101: The output of T0 DPLL 12E1/24T1/E3/T3 path.
0110: The output of T0 DPLL 16E1/16T1 path.
0111: The output of T0 DPLL ETH/OBSAI/16E1/16T1 path.
1000 ~ 1011: The output of T4 APLL.
1100: The output of T4 DPLL 77.76 MHz path.
1101: The output of T4 DPLL 12E1/24T1/E3/T3 path.
1110: The output of T4 DPLL 16E1/16T1 path.
1111: The output of T4 DPLL GSM/GPS/16E1/16T1 path.
These bits select a division factor of the divider for OUT2.
The output frequency is determined by the division factor and the signal derived from T0/T4 DPLL or T0/T4 APLL output
(selected by the OUT2_PATH_SEL[3:0] bits (b7~4, 6DH)). If the signal is derived from one of the T0/T4 DPLL outputs,
please refer to
Table 26~Table 27
EL1
5
Table 25
for the division factor selection.
OUT2_PATH_S
for the division factor selection. If the signal is derived from the T0/T4 APLL output, please refer to
EL0
4
104
OUT2_DIVIDER
3
3
Description
OUT2_DIVIDER
2
2
SYNCHRONOUS ETHERNET WAN PLL
OUT2_DIVIDER
1
1
OUT2_DIVIDER
May 19, 2009
0
0