CS8952-CQ Cirrus Logic Inc, CS8952-CQ Datasheet - Page 50

• Manufacturer Part Number: CS8952-CQ
• Description: IC ETHNT 10/100 TXRX 5V 100-TQFP
• Manufacturer: Cirrus Logic Inc
• Type: Transceiverr

Specifications of CS8952-CQ

• Mounting Type: Surface Mount
• Protocol: MII
• Voltage - Supply: 4.75 V ~ 5.25 V
• Package / Case: 100-TQFP, 100-VQFP
• Peak Reflow Compatible (260 C): No
• Supply Voltage: 5V
• Supply Voltage Max: 5V
• Transceiver Type: Ethernet
• Leaded Process Compatible: No
• No. Of Drivers: 6
• Interface Type: MII
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Number Of Drivers/receivers: -
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant, Contains lead / RoHS non-compliant
• Other names: 598-1205

6.13
50
15
14:11 Reserved
10:0
BIT
Load
15
7
Load
Scrambler Initializa-
tion Key
Scrambler Key Initialization Register - Address 14h
NAME
14
6
Read/Set
Read Only 0000
Read/Write Reset value is
TYPE
13
5
Reserved
0
dependent on the
PHY Address field
of the Self Status
Register (address
19h).
Scrambler Initialization Key
RESET
12
4
CrystalLAN™ 100BASE-X and 10BASE-T Transceiver
When this bit is set, the scrambler will be loaded with
the value in the Scrambler Initialization Key field.
When the load is complete, this bit will clear automat-
ically.
These bits should be read as don’t cares and, when
written, should be written to 0.
This field allows the Scrambler to be loaded with a
user-definable key sequence. A value of 000h has
the effect of bypassing the scrambler function.
This is valuable for testing purposes to allow a deter-
ministic response to test stimulus without a synchro-
nization delay.
Note: This field is disabled, and writes to this bit are
ignored when the National Compatibility Mode bit of
the 10BASE-T Configuration Register (address 1Ch)
is set.
11
3
10
2
DESCRIPTION
Scrambler Initialization Key
9
1
CS8952
8
0