CS8952-CQ Cirrus Logic Inc, CS8952-CQ Datasheet - Page 60

• Manufacturer Part Number: CS8952-CQ
• Description: IC ETHNT 10/100 TXRX 5V 100-TQFP
• Manufacturer: Cirrus Logic Inc
• Type: Transceiverr

Specifications of CS8952-CQ

• Mounting Type: Surface Mount
• Protocol: MII
• Voltage - Supply: 4.75 V ~ 5.25 V
• Package / Case: 100-TQFP, 100-VQFP
• Peak Reflow Compatible (260 C): No
• Supply Voltage: 5V
• Supply Voltage Max: 5V
• Transceiver Type: Ethernet
• Leaded Process Compatible: No
• No. Of Drivers: 6
• Interface Type: MII
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Number Of Drivers/receivers: -
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant, Contains lead / RoHS non-compliant
• Other names: 598-1205

60
5
4:0
BIT
CIM Status
PHY Address Field Read/Write Reset to the val-
NAME
Read Only 0
TYPE
ues on the
PHYAD[4:0] pins.
RESET
CrystalLAN™ 100BASE-X and 10BASE-T Transceiver
When clear, this bit indicates that a stable link con-
nection has been detected. When an unstable link is
detected and the Carrier Integrity Monitor Disable bit
in the PCS Sub-Layer Configuration Register
(address 17h) is clear, this bit is set and latched. It
will remain set until this register is read.
The value on pins PHYAD[4:0] are latched into this
field at power-up or reset. These bits define the PHY
address used by the management layer to address
the PHY. The external logic must know this address
in order to select this particular CS8952’s registers
individually via the MDIO and MDC pins.
DESCRIPTION
CS8952