ep1c6t144i8es Altera Corporation, ep1c6t144i8es Datasheet - Page 36

• Manufacturer Part Number: ep1c6t144i8es
• Description: Cyclone Fpga Family
• Manufacturer: Altera Corporation

Cyclone FPGA Family Data Sheet
Figure 23. Global Clock Network Multiplexers
36
Dual-Purpose Clocks [7..0]
Global Clocks [3..0]
PLL Outputs [3..0]
Core Logic [7..0]
Dual-Purpose Clock Pins
Each Cyclone device except the EP1C3 device has eight dual-purpose
clock pins, DPCLK[7..0] (two on each I/O bank). EP1C3 devices have
five DPCLK pins in the 100-pin TQFP package. These dual-purpose pins
can connect to the global clock network (see
control signals such as clocks, asynchronous clears, presets, and clock
enables, or protocol control signals such as TRDY and IRDY for PCI, or
DQS signals for external memory interfaces.
Combined Resources
Each Cyclone device contains eight distinct dedicated clocking resources.
The device uses multiplexers with these clocks to form six-bit buses to
drive LAB row clocks, column IOE clocks, or row IOE clocks. See
Figure
row clocks to feed the LE registers within the LAB.
IOE clocks have row and column block regions. Six of the eight global
clock resources feed to these row and column regions.
I/O clock regions.
23. Another multiplexer at the LAB level selects two of the six LAB
Global Clock
Network
Clock [7..0]
Figure
Preliminary Information
22) for high-fanout
Column I/O Region
IO_CLK]5..0]
LAB Row Clock [5..0]
Row I/O Region
IO_CLK[5..0]
Figure 24
Altera Corporation
shows the