PIC18F8720-I/PT Microchip Technology, PIC18F8720-I/PT Datasheet - Page 127

• Manufacturer Part Number: PIC18F8720-I/PT
• Description: IC MCU FLASH 64KX16 EE 80TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F8720-I/PT

• Program Memory Type: FLASH
• Program Memory Size: 128KB (64K x 16)
• Package / Case: 80-TFQFP
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 25MHz
• Connectivity: EBI/EMI, I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 68
• Eeprom Size: 1K x 8
• Ram Size: 3.75K x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 16x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3.75 KB
• Interface Type: I2C/SPI/USART
• Maximum Clock Frequency: 25 MHz
• Number Of Programmable I/os: 68
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, ICE4000, DM183032, DM183022, DV164136
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 16-ch x 10-bit
• Package: 80TQFP
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 25 MHz
• Operating Supply Voltage: 5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: XLT80PT3 - SOCKET TRAN ICE 80MQFP/TQFPAC164320 - MODULE SKT MPLAB PM3 80TQFPAC174011 - MODULE SKT PROMATEII 80TQFP
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

10.9
PORTJ is an 8-bit wide, bidirectional port. The corre-
sponding data direction register is TRISJ. Setting a
TRISJ bit (= 1) will make the corresponding PORTJ pin
an input (i.e., put the corresponding output driver in a
high-impedance mode). Clearing a TRISJ bit (= 0) will
make the corresponding PORTJ pin an output (i.e., put
the contents of the output latch on the selected pin).
The Data Latch register (LATJ) is also memory
mapped. Read-modify-write operations on the LATJ
register, read and write the latched output value for
PORTJ.
PORTJ is multiplexed with the system bus as the exter-
nal memory interface; I/O port functions are only avail-
able when the system bus is disabled. When operating
as the external memory interface, PORTJ provides the
control signal to external memory devices. The RJ5 pin
is not multiplexed with any system bus functions.
When enabling peripheral functions, care should be
taken in defining TRIS bits for each PORTJ pin. Some
peripherals override the TRIS bit to make a pin an
output, while other peripherals override the TRIS bit to
make a pin an input. The user should refer to the corre-
sponding peripheral section for the correct TRIS bit
settings.
The pin override value is not loaded into the TRIS reg-
ister. This allows read-modify-write of the TRIS register,
without concern due to peripheral overrides.
EXAMPLE 10-9:
 2004 Microchip Technology Inc.
CLRF
CLRF
MOVLW
MOVWF
Note:
Note:
PORTJ, TRISJ and LATJ
Registers
PORTJ
LATJ
0xCF
TRISJ
PORTJ is available only on PIC18F8X20
devices.
On a Power-on Reset, these pins are
configured as digital inputs.
PIC18F6520/8520/6620/8620/6720/8720
; Initialize PORTG by
; clearing output
; data latches
; Alternate method
; to clear output
; data latches
; Value used to
; initialize data
; direction
; Set RJ3:RJ0 as inputs
; RJ5:RJ4 as output
; RJ7:RJ6 as inputs
INITIALIZING PORTJ
FIGURE 10-20:
RD LATJ
Data
Bus
WR LATJ
or
PORTJ
WR TRISJ
RD TRISJ
RD PORTJ
Note 1: I/O pins have diode protection to V
TRIS Latch
Data Latch
D
D
CK
CK
PORTJ BLOCK DIAGRAM
IN I/O MODE
Q
Q
Q
EN
DS39609B-page 125
Schmitt
Trigger
Input
Buffer
EN
D
DD
and V
I/O pin
SS
.
(1)