HD64F3687GFPV Renesas Electronics America, HD64F3687GFPV Datasheet - Page 220

• Manufacturer Part Number: HD64F3687GFPV
• Description: IC H8 MCU FLASH 56K 64LQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300H Tinyr

Specifications of HD64F3687GFPV

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: I²C, SCI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 45
• Program Memory Size: 56KB (56K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 64-LQFP
• Package: 64LQFP
• Family Name: H8
• Maximum Speed: 20 MHz
• Operating Supply Voltage: 3.3|5 V
• Data Bus Width: 16|32 Bit
• Number Of Programmable I/os: 45
• Interface Type: I2C/SCI
• On-chip Adc: 8-chx10-bit
• Number Of Timers: 3
• For Use With: R0K436079S000BE - KIT DEV FOR H8/36079 W/COMPILER
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Section 13 Timer Z
Normal phase
Counter phase
Rev.5.00 Nov. 02, 2005 Page 186 of 500
REJ09B0027-0500
Reset synchronous PWM mode
Bit
1
0
Note: Write H'00 to TOCR to start initial outputs after stopping the counter.
Bit Name
CMD1
CMD0
Figure 13.4 Example of Outputs in Reset Synchronous PWM Mode
Initial
output
Initial
Value
0
0
Active level
Active level
and Complementary PWM Mode
R/W
R/W
R/W
Description
Combination Mode 1 and 0
00: Channel 0 and channel 1 operate normally
01: Channel 0 and channel 1 are used together to
10: Channel 0 and channel 1 are used together to
11: Channel 0 and channel 1 are used together to
Note: When reset synchronous PWM mode or
operate in reset synchronous PWM mode
operate in complementary PWM mode (transferred at
the trough)
operate in complementary PWM mode (transferred at
the crest)
Normal phase
Counter phase
complementary PWM mode is selected by these
bits, this setting has the priority to the settings for
PWM mode by each bit in TPMR. Stop TCNT_0
and TCNT_1 before making settings for reset
synchronous PWM mode or complementary PWM
mode.
Complementary PWM mode
Initial
output
Active level
TCNT_0
Active level
TCNT_1