HD64F7047F50V Renesas Electronics America, HD64F7047F50V Datasheet - Page 95

• Manufacturer Part Number: HD64F7047F50V
• Description: IC H8 MCU FLASH 256K 100TQFP
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7047r

Specifications of HD64F7047F50V

• Core Processor: SH-2
• Core Size: 32-Bit
• Speed: 50MHz
• Connectivity: CAN, SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 53
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 12K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Package: 100PQFP
• Family Name: SuperH
• Maximum Speed: 50 MHz
• Operating Supply Voltage: 5 V
• Data Bus Width: 32 Bit
• Number Of Programmable I/os: 53
• Interface Type: CAN/SCI
• On-chip Adc: 16-chx10-bit
• Number Of Timers: 7
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

The guard bit registers A0G and A1G can be specified for operands as independent registers.
Single data transfers use the IAB and IDB buses in place of the X bus and Y bus, so contention
occurs on the IDB bus between data transfers and instruction fetches.
Single data transfers handle word and longword data. Word data transfers involve only the top
word of the register. When data is loaded to a register, it goes to the top word and the bottom word
is automatically filled with zeros. If there are guard bits, the sign bit is extended to fill them. When
storing from a register, the top word is stored.
When a longword is transferred, 32 bits are valid. When loading a register that has guard bits, the
sign bit is extended to fill the guard bits.
When a guard bit register is stored, the top 24 bits become undefined, and the read out is to the
IDB bus. When the guard bit registers A0G and A1G load word data as the destination registers of
the MOVS.W instruction, the bottom byte is written to the register.
Figure 4.20 Single Data Transfer Flowchart (Word)
X0
X1
A0
A1
: Not affected for storing; cleared for loading. See
: Cannot be set
Pointer (R2, R3, R4, R5)
the text for information about A0G and A1G.
All memory areas
IAB[31:0]
IDB[15:0]
Y0
Y1
M0
M1
A0G
–2, 0, +2, +R8
Rev. 5.00 Jun 30, 2004 page 79 of 512
A1G DSR
Section 4 Instruction Features
REJ09B0171-0500O