PIC18F65K22-I/MRRSL Microchip Technology, PIC18F65K22-I/MRRSL Datasheet - Page 267

• Manufacturer Part Number: PIC18F65K22-I/MRRSL
• Description: MCU PIC 32K FLASH MEM XLP 64QFN
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F65K22-I/MRRSL

• Core Size: 8-Bit
• Program Memory Size: 32KB (16K x 16)
• Core Processor: PIC
• Speed: 64MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 53
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 16x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-VFQFN, Exposed Pad
• Controller Family/series: PIC18
• No. Of I/o's: 53
• Eeprom Memory Size: 1KB
• Ram Memory Size: 2KB
• Cpu Speed: 64MHz
• No. Of Timers: 8
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 2 KB
• Interface Type: I2C, SPI
• Maximum Clock Frequency: 64 MHz
• Number Of Programmable I/os: 53
• Number Of Timers: 8
• Operating Supply Voltage: 1.8 V to 5.5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12 bit, 16 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

20.4.2
In Full-Bridge mode, all four pins are used as outputs.
An example of a full-bridge application is provided in
Figure 20-8.
In the Forward mode, the PxA pin is driven to its active
state and the PxD pin is modulated, while the PxB and
PxC pins are driven to their inactive state, as provided in
Figure 20-9.
FIGURE 20-8:
 2010 Microchip Technology Inc.
FULL-BRIDGE MODE
PxA
PxB
PxC
PxD
EXAMPLE OF FULL-BRIDGE APPLICATION
FET
Driver
FET
Driver
Preliminary
QA
QB
PIC18F87K22 FAMILY
In the Reverse mode, the PxC pin is driven to its active
state and the PxB pin is modulated, while the PxA and
PxD pins are driven to their inactive state, as provided
Figure 20-9.
The PxA, PxB, PxC and PxD outputs are multiplexed
with the port data latches. The associated TRIS bits
must be cleared to configure the PxA, PxB, PxC and
PxD pins as outputs.
Load
V+
V-
QC
QD
FET
Driver
FET
Driver
DS39960B-page 267