ST10F276Z5Q3TR STMicroelectronics, ST10F276Z5Q3TR Datasheet - Page 117

• Manufacturer Part Number: ST10F276Z5Q3TR
• Description: MCU 16BIT 832KBIT FLASH 144-PQFP
• Manufacturer: STMicroelectronics
• Series: ST10r

Specifications of ST10F276Z5Q3TR

• Core Processor: ST10
• Core Size: 16-Bit
• Speed: 64MHz
• Connectivity: ASC, CAN, EBI/EMI, I²C, SSC, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 111
• Program Memory Size: 832KB (832K x 8)
• Program Memory Type: FLASH
• Ram Size: 68K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 24x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 144-QFP
• Processor Series: ST10F27x
• Core: ST10
• Data Bus Width: 16 bit
• Data Ram Size: 68 KB
• Interface Type: CAN, I2C
• Maximum Clock Frequency: 64 MHz
• Number Of Programmable I/os: 111
• Number Of Timers: 5
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 24 Channel
• For Use With: 497-6399 - KIT DEV STARTER ST10F276Z5
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

ST10F276Z5
Figure 30. Synchronous long hardware RESET (EA = 1)
1. If during the reset condition (RSTIN low), RPD voltage drops below the threshold voltage (around 2.5 V for
2. Minimum RSTIN low pulse duration shall also be longer than 500ns to guarantee the pulse is not masked
5 V operation), the asynchronous reset is then immediately entered.
If RPD returns above the threshold, the reset is definitively taken as asynchronous.
by the internal filter (refer to
RSTIN
RSTOUT
RPD
RSTF
(After Filter)
P0[15:13]
P0[12:2]
P0[1:0]
FLARST
RST
IBUS-CS
(Internal)
≤ 500 ns
≥ 50 ns
≤4 TCL
200
2)
µ
Section 19.6
≤12 TCL
not t.
A Discharge
not transparent
≤ 500 ns
≥ 50 ns
).
1024+8 TCL
1024+8 TCL
not transparent
transparent
At this time RSTF is sampled LOW
so it is definitely LONG reset
transparent
≤ 500 ns
≥ 50 ns
3..4 TCL
≤ 1 ms
1)
V
RPD
> 2.5 V Asynchronous Reset not entered
≤ 2 TCL
not t.
not t.
not t.
7 TCL
System reset
117/239