DF2160BVTE10 Renesas Electronics America, DF2160BVTE10 Datasheet - Page 201

• Manufacturer Part Number: DF2160BVTE10
• Description: IC H8S MCU FLASH 64K 144TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of DF2160BVTE10

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 10MHz
• Connectivity: Host Interface (LPC), I²C, IrDA, SCI, X-Bus
• Peripherals: PWM, WDT
• Number Of I /o: 114
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-TQFP, 144-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Other names: HD64F2160BVTE10; HD64F2160BVTE10

This LSI includes a data transfer controller (DTC). The DTC can be activated by an interrupt or
software, to transfer data.
Figure 7.1 shows a block diagram of the DTC. The DTC's register information is stored in the on-
chip RAM. When the DTC is used, the RAME bit in SYSCR must be set to 1. A 32-bit bus
connects the DTC to addresses H'(FF)EC00 to H'(FF)EFFF in on-chip RAM (1 kbyte), enabling
32-bit/1-state reading and writing of the DTC register information.
7.1
DTCH80AA_000020020700
Transfer is possible over any number of channels
Three transfer modes
Normal, repeat, and block transfer modes are available.
One activation source can trigger a number of data transfers (chain transfer)
Direct specification of 16-Mbyte address space is possible
Activation by software is possible
Transfer can be set in byte or word units
A CPU interrupt can be requested for the interrupt that activated the DTC
Module stop mode can be set
Features
Section 7 Data Transfer Controller (DTC)
Section 7 Data Transfer Controller (DTC)
Rev. 3.00 Mar 21, 2006 page 145 of 788
REJ09B0300-0300