SAK-TC1767-256F80HL AD Infineon Technologies, SAK-TC1767-256F80HL AD Datasheet - Page 13

• Manufacturer Part Number: SAK-TC1767-256F80HL AD
• Description: IC MCU 32BIT FLASH 176-LQFP
• Manufacturer: Infineon Technologies
• Series: TC17xxr

Specifications of SAK-TC1767-256F80HL AD

• Core Processor: TriCore
• Core Size: 32-Bit
• Speed: 80MHz
• Connectivity: ASC, CAN, MLI, MSC, SSC
• Peripherals: DMA, POR, WDT
• Number Of I /o: 88
• Program Memory Size: 2MB (2M x 8)
• Program Memory Type: FLASH
• Ram Size: 128K x 8
• Voltage - Supply (vcc/vdd): 1.42 V ~ 1.58 V
• Data Converters: A/D 4x10b, 32x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 176-LFQFP
• Data Bus Width: 32 bit
• Data Ram Size: 92 KB
• Interface Type: SPI
• Maximum Clock Frequency: 80 MHz
• Number Of Programmable I/os: 88
• Number Of Timers: 2
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 2 (12 bit, 16 Channel)
• Packages: PG-LQFP-176
• Max Clock Frequency: 80.0 MHz
• Sram (incl. Cache): 128.0 KByte
• Can Nodes: 2
• A / D Input Lines (incl. Fadc): 36
• Program Memory: 2.0 MB
• For Use With: B158-H8539-G2-X-7600IN - KIT STARTER TC176X SERIES
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: SP000442086

2.1.3
In tables where register bit fields are defined, the following conventions are used to
indicate undefined and unimplemented function. Furthermore, types of bits and bit fields
are defined using the abbreviations as shown in
Table 2
Function of Bits
Unimplemented,
Reserved
rw
rwh
r
w
rh
s
f
2.1.4
Read and write access to registers and memory locations are sometimes restricted. In
memory and register access tables, the terms as defined in
Data Sheet
Reserved, Undefined, and Unimplemented Terminology
Register Access Modes
Bit Function Terminology
Description
Register bit fields named 0 indicate unimplemented functions
with the following behavior.
•
•
•
These bit fields are reserved. The detailed description of these
bit fields can be found in the register descriptions.
The bit or bit field can be read and written.
As rw, but bit or bit field can be also set or reset by hardware.
The bit or bit field can only be read (read-only).
The bit or bit field can only be written (write-only). A read to this
register will always give a default value back.
This bit or bit field can be modified by hardware (read-hardware,
typical example: status flags). A read of this bit or bit field give
the actual status of this bit or bit field back. Writing to this bit or
bit field has no effect to the setting of this bit or bit field.
Bits with this attribute are “sticky” in one direction. If their reset
value is once overwritten by software, they can be switched
again into their reset state only by a reset operation. Software
cannot switch this type of bit into its reset state by writing the
register. This attribute can be combined to “rws” or “rwhs”.
Bits with this attribute are readable only when they are accessed
by an instruction fetch. Normal data read operations will return
other values.
Reading these bit fields returns 0.
These bit fields should be written with 0 if the bit field is
defined as r or rh.
These bit fields have to be written with 0 if the bit field is
defined as rw.
9
Table
2.
Table 3
are used.
Introduction
V1.3, 2009-09
TC1767