XC705B32CFNE Freescale Semiconductor, XC705B32CFNE Datasheet - Page 82

• Manufacturer Part Number: XC705B32CFNE
• Description: IC MCU 2.1MHZ 32K OTP 52-PLCC
• Manufacturer: Freescale Semiconductor
• Series: HC05r

Specifications of XC705B32CFNE

• Core Processor: HC05
• Core Size: 8-Bit
• Speed: 2.1MHz
• Connectivity: SCI
• Peripherals: POR, WDT
• Number Of I /o: 32
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: OTP
• Eeprom Size: 256 x 8
• Ram Size: 528 x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x8b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 52-PLCC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

6
6.11
The SCI system is configured and controlled by five registers: SCDR, SCCR1, SCCR2, SCSR,
and BAUD.
6.11.1
The SCDR is controlled by the internal R/W signal and performs two functions in the SCI. It acts
as the receive data register (RDR) when it is read and as the transmit data register (TDR) when it
is written.
provides the interface from the receive shift register to the internal data bus and the TDR provides
the parallel interface from the internal data bus to the transmit shift register.
The receive data register is a read-only register containing the last byte of data received from the
shift register for the internal data bus. The RDR full bit (RDRF) in the serial communications status
register is set to indicate that a byte has been transferred from the input serial shift register to the
SCDR. The transfer is synchronized with the receiver bit rate clock (from the receiver control) as
shown in
The transmit data register (TDR) is a write-only register containing the next byte of data to be
applied to the transmit shift register from the internal data bus. As long as the transmitter is
enabled, data stored in the SCDR is transferred to the transmit shift register (after the current byte
in the shift register has been transmitted).
The transfer is synchronized with the transmitter bit rate clock (from the transmitter control) as
shown in
6.11.2
The SCI control register 1 (SCCR1) contains control bits related to the nine data bit character
format, the receiver wake-up feature and the options to output the transmitter clocks for
synchronous transmissions.
Freescale
6-10
SCI control 1 (SCCR1)
SCI data (SCDR)
Figure
Figure
Figure 6-1
SCI registers
Serial communications data register (SCDR)
Serial communications control register 1 (SCCR1)
6-1. All data is received with the least significant bit first.
6-1. All data is received with the least significant bit first.
shows this register as two separate registers, RDR and TDR. The RDR
SERIAL COMMUNICATIONS INTERFACE
Address
Address
$000E
$0011
bit 7
bit 7
R8
bit 6
bit 6
T8
bit 5
bit 5
bit 4
bit 4
M
WAKE CPOL CPHA LBCL Undefined
bit 3
bit 3
bit 2
bit 2
bit 1
bit 1
MC68HC05B6
bit 0
bit 0
0000 0000
Rev. 4.1
on reset
on reset
State
State