SC68C652BIB48,157 NXP Semiconductors, SC68C652BIB48,157 Datasheet - Page 6

• Manufacturer Part Number: SC68C652BIB48,157
• Description: IC UART DUAL 48LQFP
• Manufacturer: NXP Semiconductors

Specifications of SC68C652BIB48,157

• Features: 2 Channels
• Number Of Channels: 2, DUART
• Fifo's: 32 Byte
• Voltage - Supply: 2.5V, 3.3V, 5V
• With Auto Flow Control: Yes
• With Irda Encoder/decoder: Yes
• With False Start Bit Detection: Yes
• With Modem Control: Yes
• Mounting Type: Surface Mount
• Package / Case: 48-LFQFP
• Voltage: 2.25 V ~ 5.5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 935278766157; SC68C652BIB48; SC68C652BIB48

NXP Semiconductors
SC68C652B_2
Product data sheet
Table 2.
Symbol
RESET
RIA
RIB
RTSA
RTSB
RXA
RXB
RXRDYA
RXRDYB
TXA
TXB
TXRDYA
TXRDYB
Pin description
Pin
36
41
21
33
22
5
4
31
18
7
8
43
6
Type
I
I
I
O
O
I
I
O
O
O
O
O
O
Rev. 02 — 2 November 2009
…continued
Dual UART with 32-byte FIFOs and IrDA encoder/decoder
Description
Reset (active LOW). This pin will reset the internal registers and
all the outputs. The UART transmitter output and the receiver input
will be disabled during reset time. See
external reset condition”
Ring Indicator (active LOW). These inputs are associated with
individual UART channels A and B. A logic 0 on these pins
indicates the modem has received a ringing signal from the
telephone line. A logic 1 transition on these input pins generates an
interrupt.
Request to Send (active LOW). These outputs are associated
with individual UART channels, A and B. A logic 0 on the RTSn pin
indicates the transmitter has data ready and waiting to send.
Writing a logic 1 in the modem control register MCR[1] will set this
pin to a logic 0, indicating data is available. After a reset these pins
are set to a logic 1. These pins have no effect on the UART’s
transmit or receive operation.
Receive data input. These inputs are associated with individual
serial channel data to the SC68C652B receive input circuits A and
B. The RXn pin will be a logic 1 during reset, idle (no data), or when
the transmitter is disabled. During the local loopback mode, these
RXn input pins are disabled and transmit data is connected to the
UART receive input internally.
Receive Ready (active LOW). RXRDYA or RXRDYB goes LOW
when the trigger level has been reached or the FIFO has at least
one character. It goes HIGH when the receive FIFO is empty.
Transmit data A, B. These outputs are associated with individual
serial transmit channel data from the SC68C652B. The TXn pin will
be a logic 1 during reset, idle (no data), or when the transmitter is
disabled. During the local loopback mode, the TXn output pins are
disabled and transmit data is internally connected to the UART
receive input.
Transmit Ready A, B (active LOW). These outputs provide the
transmit FIFO/THR status for individual transmit channels A and B.
TXRDYn is primarily intended for monitoring DMA mode 1 transfers
for the transmit data FIFOs. An individual channel’s TXRDYA,
TXRDYB buffer ready status is indicated by logic 0, that is, at least
one location is empty and available in the FIFO or THR. This pin
goes to a logic 1 (DMA mode 1) when there are no more empty
locations in the FIFO or THR. This signal can also be used for
single mode transfers (DMA mode 0).
for initialization details.
Section 7.11 “SC68C652B
SC68C652B
© NXP B.V. 2009. All rights reserved.
6 of 43