WM8351GEB/V Wolfson Microelectronics, WM8351GEB/V Datasheet - Page 46

• Manufacturer Part Number: WM8351GEB/V
• Description: Audio CODECs Audio CODEC plus pwr management
• Manufacturer: Wolfson Microelectronics

Specifications of WM8351GEB/V

• Number Of Adc Inputs: 2
• Number Of Dac Outputs: 2
• Conversion Rate: 48 KSPS
• Interface Type: Serial (2-Wire, 3-Wire, 4-Wire)
• Resolution: 12 bit
• Operating Supply Voltage: 3.7 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Package / Case: BGA
• Minimum Operating Temperature: - 25 C
• Number Of Channels: 2 ADC/2 DAC
• Supply Current: 260 uA
• Thd Plus Noise: - 83 dB
• Audio Codec Type: Stereo
• No. Of Adcs: 2
• No. Of Dacs: 2
• No. Of Input Channels: 8
• No. Of Output Channels: 6
• Adc / Dac Resolution: 24bit
• Adcs / Dacs Signal To Noise Ratio: 95dB
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

WM8351
12.2 CRYSTAL OSCILLATOR
w
12.1.1
The WM8351 audio CODEC core requires an accurate, low-jitter clock. Clocks for the ADCs, DACs,
DSP core functions, and the digital audio interface are all derived from a common internal clock
source, SYSCLK. This clock may be derived directly from MCLK, or may be generated from an FLL
using MCLK or alternate sources as an external reference. The SYSCLK source is selected by
MCLK_SEL. Many commonly-used audio sample rates can be derived directly from typical MCLK
frequencies.
The ADC and DAC sample rates are independently selectable, relative to SYSCLK, using
ADC_CLKDIV and DAC_CLKDIV. Refer to Section 12.3 for more details
12.1.2
During a system start-up, no external clock signals are available. The WM8351 therefore generates
all internal clocks required for the DC-DC converters, system control and housekeeping functions.
These clocks are derived from the on-chip RC oscillator. The DC-DC converters’ nominal switching
rate is 2.0MHz and 1.0MHz.
12.1.3
The internal RC Oscillator generates the system clock 2.0MHz as well as the clock for the DCDC
converters. The period of the generated clock is defined by the time needed for a fixed value
capacitor to be charged up to the reference voltage by a constant current source.
The on-chip crystal oscillator generates a 32.768kHz reference clock, which can be used to provide
reference clock for the Real Time Clock (RTC) in the WM8351. It may also be used as a reference
input to the FLL, for the purpose of generating the CODEC clocks. The oscillator is powered from
VRTC, so that it can keep running when no other power source is available. It requires an external
crystal on the X1 and X2 pins, as well as two capacitors and a resistor, connected as shown in Figure
34.
Figure 34 WM8351 Crystal Oscillator
CLOCKING THE AUDIO CODEC
CLOCKING THE DC-DC CONVERTERS
INTERNAL RC OSCILLATOR
PD, March 2010, Rev 4.2
Production Data
46