PIC12F1822-I/MF Microchip Technology, PIC12F1822-I/MF Datasheet - Page 222

• Manufacturer Part Number: PIC12F1822-I/MF
• Description: IC, 8BIT MCU, PIC12, 32MHZ, DFN-8
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 12Fr

Specifications of PIC12F1822-I/MF

• Controller Family/series: PIC12
• No. Of I/o's: 6
• Eeprom Memory Size: 256Byte
• Ram Memory Size: 128Byte
• Cpu Speed: 32MHz
• No. Of Timers: 3
• Core Size: 8 Bit
• Program Memory Size: 3.5KB
• Core Processor: PIC
• Speed: 32MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 6
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 8-DFN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PIC12F/LF1822/16F/LF1823
REGISTER 23-2:
DS41413A-page 222
bit 7
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
bit 7
bit 6-4
bit 3-2
bit 1-0
Note 1:
CCP1ASE
R/W-0/0
2:
If C1SYNC is enabled, the shutdown will be delayed by Timer1.
C2, P1C and P1D available on PIC16F/LF1823 only.
CCP1ASE: CCP1 Auto-Shutdown Event Status bit
1 = A shutdown event has occurred; CCP1 outputs are in shutdown state
0 = CCP1 outputs are operating
CC1PAS<2:0>: CCP1 Auto-Shutdown Source Select bits
000 = Auto-shutdown is disabled
001 = Comparator C1 output low
010 = Comparator C2 output low
011 = Either Comparator C1 or C2 low
100 = V
101 = V
110 = V
111 = V
PSS1AC<1:0>: Pins P1A and P1C Shutdown State Control bits
00 = Drive pins P1A and P1C to ‘0’
01 = Drive pins P1A and P1C to ‘1’
1x = Pins P1A and P1C tri-state
PSS1BD<1:0>: Pins P1B and P1D Shutdown State Control bits
00 = Drive pins P1B and P1D to ‘0’
01 = Drive pins P1B and P1D to ‘1’
1x = Pins P1B and P1D tri-state
R/W-0/0
CCP1AS: CCP1 AUTO-SHUTDOWN CONTROL REGISTER
IL
IL
IL
IL
on INT pin
on INT pin or Comparator C1 low
on INT pin or Comparator C2 low
on INT pin or Comparator C1 or Comparator C2 low
CCP1AS<2:0>
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
R/W-0/0
R/W-0/0
(2)
(1)
(1, 2)
Preliminary
(2)
(2)
(1, 2)
(1)
(1, 2)
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
R/W-0/0
PSS1AC<1:0>
R/W-0/0
(1, 2)
(2)
(2)
 2010 Microchip Technology Inc.
R/W-0/0
PSS1BD<1:0>
R/W-0/0
bit 0