SAK-C505CA-4EMCA Infineon Technologies, SAK-C505CA-4EMCA Datasheet - Page 71

• Manufacturer Part Number: SAK-C505CA-4EMCA
• Description: IC, 8BIT MCU, 32K OTP, SMD
• Manufacturer: Infineon Technologies

Specifications of SAK-C505CA-4EMCA

• Core Size: 8bit
• No. Of I/o's: 34
• Program Memory Size: 32KB
• Ram Memory Size: 256Byte
• Cpu Speed: 20MHz
• Oscillator Type: External, Internal
• No. Of Timers: 3
• No. Of Pwm Channels: 4
• Digital Ic Case Style: MQFP
• Controller Family/series: C500
• Peripherals: ADC
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Note:
1) V
2) During the sample time the input capacitance C
3) This parameter includes the sample time t
4) T
5) During the conversion the ADC’s capacitance must be repeatedly charged or discharged. The internal
6) Not 100% tested, but guaranteed by design characterization.
Data Sheet
these cases will be X000
internal resistance of the analog source must allow the capacitance to reach their final voltage level within t
After the end of the sample time t
calibration. Values for the conversion clock t
the previous page.
other voltages within the defined voltage range.
If an overload condition occurs on maximum 2 unused analog input pins and the absolute sum of input overload
currents on all analog input pins does not exceed 10 mA, an additional conversion error of 1/2 LSB is
permissible.
resistance of the reference source must allow the capacitance to reach their final voltage level within the
indicated time. The maximum internal resistance results from the programmed conversion timing.
UE
AIN
is tested at V
may exeed V
AREF
AGND
= 5.0 V, V
H
or V
or X3FF
AREF
S
, changes of the analog input voltage have no effect on the conversion result.
AGND
H
up to the absolute maximum ratings. However, the conversion result in
, respectively.
= 0 V,
S
ADC
, the time for determining the digital result and the time for the
V
AIN
depend on programming and can be taken from the table on
DD
67
= 4.9 V. It is guaranteed by design characterization for all
must be charged/discharged by the external source. The
C505/C505C/C505A/C505CA
12.00
S
.