11730D AGILENT TECHNOLOGIES, 11730D Datasheet - Page 103

• Manufacturer Part Number: 11730D
• Description: SENSOR CABLE, 50FT
• Manufacturer: AGILENT TECHNOLOGIES

Specifications of 11730D

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Cable Length: 50ft
• Features: Reduces RFI Effect On Low Power Readings With Improved Shielding Design
• Cable Assembly Type: Sensor
• Cable Color: Gray
• Rohs Compliant: No
• For Use With: 8480 & E-Series Power Sensors
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

92
15
Switches
Switches (continued)
Agilent 8761A
Agilent 8762/63/64 series
Agilent 8765 series
Coaxial – flexible, high performance
The Agilent N181x series of coaxial latching switches combines
unmatched flexibility of configuration with excellent repeatability,
long life, and reliability. Options include choice of DC connector
type, coil voltage level, standard or high performance, position
indictors, current interrupts, and TTL/5V CMOS compatibility. All
switches have SMA (f) connectors and are offered in frequency
ranges up to 26.5 GHz.
The Agilent N1810UL is a three-port single pole double throw
(SPDT) switch. The Agilent N1810TL is a single pole double throw
switch with two 50 ohm terminations, making it ideal for
applications where port matching is required. The N1811TL is a
four-port switch with one internal load that can terminate the
device under test when in the bypass mode. (up to 1 watt.) The
N1812UL is a versatile, unterminated 5-port switch that can be
used in transfer switch applications and for signal path reversal.
SPDT – configurable connectors
Agilent 8761A, B SPDT switches operate up to 18 GHz. Each port
features six connector options plus 50 ohm termination for
design flexibility.
SPDT – high performance
Agilent 8762A, B, C switches operate up to 26.5 GHz. They
provide exceptional isolation of 90 dB to 18 GHz and switched
terminations, so that all ports maintain a 50 ohm match. Internal
loads are rated at 1 watt average (100 W peak, 10 µsec pulse
width). Control voltage Options T15 and T24 are compatible with
TTL/5V CMOS drive circuitry. Another model, Agilent 8762F, is
designed for 75 ohm transmission lines, making it valuable for
communication applications up to 4 GHz.
SPDT – high reliability
Agilent 8765A, B, C, D, F are SPDT switches that offer outstanding
performance and a life of 5 million cycles. This switch family is
available in four models up to 40 GHz, as well as a 75 ohm model
to 4 GHz. Unlike the Agilent 8762 switches, they do not have
internal, switched RF loads or DC current interrupts. Coil voltage
options cover the complete range from 5 Vdc to 24 Vdc. Since the
switches are magnetically latched, the coil voltage may be
switched off after 15 ms.
The standard Agilent 8765 switch comes with ribbon cables and
standard printed circuit board with a 0.025-inch connector for
convenient assembly. Optional solder terminals are available.
Coaxial – high performance
Agilent 8763A, B, C switches operate up to 26.5 GHz. They are
preferred for drop-in, drop-out applications because of their
compact design. These switches are used to automatically insert or
remove a test component from a signal path. Because of their
excellent isolation, they can also be used as the intersection
(crosspoint) switch in full-access matrix switching applications.
One port is internally terminated. Options T15 and T24 are
available for TTL/5V CMOS compatibility.
Agilent 8764A, B, C switches operate up to 26.5 GHz, similar to
the Agilent 8763, but with the internal termination replaced by a
fifth port. The fifth port can be utilized for signal path reversal or as
a calibration port. Options T15 and T24 offer TTL/5V CMOS
compatibility.
Multiport – low profile
Agilent 8766/67/68/69K series switches are modified versions of
the Agilent 8494/95/96/97 series step attenuators (DC to
26.5 GHz) for applications requiring a single-pole, 3-throw,
4-throw, 5-throw or 6-throw coaxial switch. The switch ports are
unterminated. These switches offer warranted repeatability of
0.03 dB maximum over 5 million switching cycles.
The switches are available with several optional cables and
connectors to make them compatible with standard 14-pin DIP
sockets. Isolation and insertion loss vary with frequency, and
depend upon the port selected.
Switches