S1D13700F01A100 Epson, S1D13700F01A100 Datasheet - Page 156

• Manufacturer Part Number: S1D13700F01A100
• Description: Display Drivers LCD CONTROLLER
• Manufacturer: Epson

Specifications of S1D13700F01A100

• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Operating Temperature Classification: Industrial
• Package Type: TQFP
• Pin Count: 80
• Mounting: Surface Mount
• Operating Supply Voltage (min): 2.7V
• Lead Free Status / Rohs Status: Supplier Unconfirmed

1.4 REGS Tab
S1D13705F00A UTILITIES (X27A-B-001-01)
The REGS tab displays the register values derived after converting the information on the CFG page
in to register values.
The automatic calculations may not result in precisely the register values required for a specific use.
For instance the HNDP or VNDP values may have to be tweaked for a particular panel. From this
page the user can set specific register to specific values.
Not all the S1D13705 registers are represented on this page. For example; it makes no sense to
represent REG[00], the Revision Code, which is read only. Nor are the Look-Up Table registers,
REG[15] and REG[17], as they must be specially handled by the application after the majority of the
S1D13705 registers have been initialized.
Typical use of 1375CFG involves using the CFG page to quickly set register values. After
performing the initial setup on the CFG page the user should switch to the REGS page and perform
any register adjusting that must be done.
IMPORTANT : do not return to the CFG page after making register adjustments on this page. Doing
so will result in an automatic recalculation of some register values and the possible loss of adjusted
settings.
Figure 1-8 REGS Window
EPSON
1: 1375CFG CONFIGURATION PROGRAM
3-9