S1D13700F01A100 Epson, S1D13700F01A100 Datasheet - Page 162

• Manufacturer Part Number: S1D13700F01A100
• Description: Display Drivers LCD CONTROLLER
• Manufacturer: Epson

Specifications of S1D13700F01A100

• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Operating Temperature Classification: Industrial
• Package Type: TQFP
• Pin Count: 80
• Mounting: Surface Mount
• Operating Supply Voltage (min): 2.7V
• Lead Free Status / Rohs Status: Supplier Unconfirmed

Program Messages
S1D13705F00A UTILITIES (X27A-B-002-01)
ERROR: Did not find a 13705 device.
The HAL was unable to read the revision code register on the S1D13705. Ensure that the S1D13705
hardware is installed and that the hardware platform has been configured correctly. Also check that
the display memory address has been configured correctly.
ERROR: Unable to locate/load S1D13XXX.VXD
1375PLAY was unable to load a required driver. The file S1D13XXX.VXD should be located in
x:\WINDOWS\SYSTEM or in x:\WINNT\SYSTEM. If the file is not there, install it as described in
the S1D13XXX 32-Bit Windows Device Driver Installation Guide, document number X00A-E-003-
xx.
ERROR: An IOCTL error occurred
This message indicates an error at the IO control layer occurred. The usual cause for this is an
incorrect hardware configuration.
ERROR: The HAL returned an unknown error
This message should never be displayed, it indicates that 1375SHOW is unable to determine the
cause of an error returned from the HAL.
ERROR: Could not initialize device
The call to initialize the S1D13705 registers failed.
Not enough memory for www x hhh x bpp!!
This message is printed if there is insufficient display memory to show a complete image with a
width of www pixels, a height of hhh pixels and a color depth of bpp bit-per-pixel. In this case the
mode is skipped and the next display mode is attempted.
EPSON
2: 1375SHOW DEMONSTRATION PROGRAM
3-15