S1D13700F01A100 Epson, S1D13700F01A100 Datasheet - Page 237

• Manufacturer Part Number: S1D13700F01A100
• Description: Display Drivers LCD CONTROLLER
• Manufacturer: Epson

Specifications of S1D13700F01A100

• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Operating Temperature Classification: Industrial
• Package Type: TQFP
• Pin Count: 80
• Mounting: Surface Mount
• Operating Supply Voltage (min): 2.7V
• Lead Free Status / Rohs Status: Supplier Unconfirmed

6: INTERFACING TO THE PHILIPS MIPS PR31500/PR31700 PROCESSOR
6 I
6.1 Introduction
6.2 Interfacing to the PR31500/PR31700
6.3 S1D13705 Host Bus Interface
5-36
PR31500/PR31700 P
This application note describes the hardware required to interface the S1D13705 Embedded
Memory LCD Controller and the Philips MIPS PR31500/PR31700 Processor. The pairing of these
two devices results in an embedded system offering impressive display capability with very low
power consumption.
The Philips MIPS PR31500/PR31700 processor supports up to two PC Card (PCMCIA) slots. It is
through this host bus interface that the S1D13705 connects to the PR31500/PR31700 processor.
The S1D13705 can be successfully interfaced using one of two configurations:
• Direct connection to PR31500/PR31700 (see Section 5.4, “Direct Connection to the Toshiba
• System design using one ITE IT8368E PC Card/GPIO buffer chip (see Section 5.5, “Using the
This section is a summary of the host bus interface modes available on the S1D13705 that would be
used to interface to the PR31500/PR31700.
The S1D13705 implements a 16-bit interface to the host microprocessor which may operate in one
of several modes compatible with most of the popular embedded microprocessor families. The
interface modes used for the PR31500/PR31700 are:
• Generic #1 (Chip Select, plus individual Read Enable/Write Enable for each byte).
• Generic #2 (External Chip Select, shared Read/Write Enable for high byte, individual Read/Write
X27A-G-012-01
TMPR3912” on page 5-31).
ITE IT8368E PC Card Buffer” on page 5-33).
Enable for low byte).
NTERFACING TO THE
EPSON
P
ROCESSOR
HILIPS
S1D13705F00A APPLICATION NOTES
MIPS
(X27A-G-012-01)