LS-E2-L-BASE-PC-N Lattice, LS-E2-L-BASE-PC-N Datasheet - Page 25

• Manufacturer Part Number: LS-E2-L-BASE-PC-N
• Description: MCU, MPU & DSP Development Tools ispLEVER Base - LS ECP2 50E Std Dev Kit
• Manufacturer: Lattice

Specifications of LS-E2-L-BASE-PC-N

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Lattice Semiconductor
5. Press the SCAN button located on the toolbar. The LatticeECP2 device should be automatically detected. The
6. Double-click the device to open the device information dialog as shown in Figure 6. In the Device Options drop-
7. Click on the green GO button on the ispVM toolbar to program the SPI Serial Flash.
8. Press and release SW2 (Program) on the board to transfer the configuration data from the SPI Serial Flash to
Figure 7. SPI Serial Flash Dialog Box
Ordering Information
Technical Support Assistance
Hotline: 1-800-LATTICE (North America)
e-mail:
Internet: www.latticesemi.com
LatticeECP2 Evaluation Board - Standard
ispLEVER Base with LatticeECP2 50E Standard Development Kit
resulting screen should be similar to Figure 5.
down box, select SPI Flash Programming; you should see a window similar to Figure 7. Select the Flash
device that is on your board and then browse to the desired bitstream file (.bit). Click OK in both dialog boxes.
the LatticeECP2. The LatticeECP2 should now be running the new code.
[phone] (Outside North America)
[e-mail]
Description
25
LatticeECP2 Standard Evaluation Board
LFE2-50E-L-EV
LS-E2-L-BASE-PC-N
Ordering Part
Number
Friendly Use Period (EFUP)
China RoHS Environment-
User’s Guide
10