LAN9313I-NZW SMSC, LAN9313I-NZW Datasheet - Page 239

• Manufacturer Part Number: LAN9313I-NZW
• Description: Ethernet ICs Three Port 10/100 Ethernet Switch
• Manufacturer: SMSC
• Type: Three Port Managed Ethernet Switchr

Specifications of LAN9313I-NZW

• Ethernet Connection Type: 10 Base-T, 100 Base-TX
• Minimum Operating Temperature: 0 C
• Mounting Style: SMD/SMT
• Product: Ethernet Switches
• Number Of Transceivers: 1
• Standard Supported: 802.3, 802.3u
• Data Rate: 10 Mbps, 100 Mbps
• Supply Voltage (max): 3.3 V
• Supply Voltage (min): 0 V
• Supply Current (max): 155 mA, 270 mA
• Maximum Operating Temperature: + 70 C
• Package / Case: TQFP-100
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Three Port 10/100 Managed Ethernet Switch with MII
Datasheet
SMSC LAN9313/LAN9313i
13.2.2.5
15:14
BITS
13
12
11
10
9
8
7
6
5
RESERVED
Remote Fault
This bit determines if remote fault indication will be advertised to the link
partner.
0: Remote fault indication not advertised
1: Remote fault indication advertised
RESERVED
Note:
Asymmetric Pause
This bit determines the advertised asymmetric pause capability.
0: No Asymmetric PAUSE toward link partner advertised
1: Asymmetric PAUSE toward link partner advertised
Symmetric Pause
This bit determines the advertised symmetric pause capability.
0: No Symmetric PAUSE toward link partner advertised
1: Symmetric PAUSE toward link partner advertised
RESERVED
100BASE-X Full Duplex
This bit determines the advertised 100BASE-X full duplex capability.
0: 100BASE-X full duplex ability not advertised
1: 100BASE-X full duplex ability advertised
100BASE-X Half Duplex
This bit determines the advertised 100BASE-X half duplex capability.
0: 100BASE-X half duplex ability not advertised
1: 100BASE-X half duplex ability advertised
10BASE-T Full Duplex
This bit determines the advertised 10BASE-T full duplex capability.
0: 10BASE-T full duplex ability not advertised
1: 10BASE-T full duplex ability advertised
10BASE-T Half Duplex
This bit determines the advertised 10BASE-T half duplex capability.
0: 10BASE-T half duplex ability not advertised
1: 10BASE-T half duplex ability advertised
Port x PHY Auto-Negotiation Advertisement Register (PHY_AN_ADV_x)
This read/write register contains the advertised ability of the Port x PHY and is used in the Auto-
Negotiation process with the link partner.
Note: This register is re-written by the EEPROM Loader following the release of reset or a RELOAD
This bit should be written as 0.
command. Refer to
Index (decimal): 4
DESCRIPTION
Section 8.2.4, "EEPROM Loader," on page 113
DATASHEET
239
Size:
16 bits
for additional information.
TYPE
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
RO
RO
Revision 1.7 (06-29-10)
Note 13.55
Note 13.55
Note 13.56
Note 13.57
Note 13.58
DEFAULT
Table 13.8
Table 13.9
0b
0b
0b
1b
1b
-
-