SPP12N50C3 Infineon Technologies, SPP12N50C3 Datasheet - Page 14

• Manufacturer Part Number: SPP12N50C3
• Description: MOSFET N-CH 560V 11.6A TO-220
• Manufacturer: Infineon Technologies
• Series: CoolMOS™r

Specifications of SPP12N50C3

• Package / Case: TO-220-3 (Straight Leads)
• Fet Type: MOSFET N-Channel, Metal Oxide
• Fet Feature: Standard
• Rds On (max) @ Id, Vgs: 380 mOhm @ 7A, 10V
• Drain To Source Voltage (vdss): 560V
• Current - Continuous Drain (id) @ 25° C: 11.6A
• Vgs(th) (max) @ Id: 3.9V @ 500µA
• Gate Charge (qg) @ Vgs: 49nC @ 10V
• Input Capacitance (ciss) @ Vds: 1200pF @ 25V
• Power - Max: 125W
• Mounting Type: Through Hole
• Minimum Operating Temperature: - 55 C
• Configuration: Single
• Transistor Polarity: N-Channel
• Resistance Drain-source Rds (on): 0.38 Ohm @ 10 V
• Drain-source Breakdown Voltage: 500 V
• Gate-source Breakdown Voltage: +/- 20 V
• Continuous Drain Current: 11.6 A
• Power Dissipation: 125000 mW
• Maximum Operating Temperature: + 150 C
• Mounting Style: Through Hole
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: SP000014459; SPP12N50C3IN; SPP12N50C3X; SPP12N50C3XK; SPP12N50C3XTIN; SPP12N50C3XTIN

SPP12N50C3
SPI12N50C3, SPA12N50C3
Published by
Infineon Technologies AG
81726 Munich, Germany
© 2007 Infineon Technologies AG
All Rights Reserved.
Legal Disclaimer
The information given in this document shall in no event be regarded as a guarantee of
conditions or characteristics. With respect to any examples or hints given herein, any typical
values stated herein and/or any information regarding the application of the device,
Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind,
including without limitation, warranties of non-infringement of intellectual property rights
of any third party.
Information
For further information on technology, delivery terms and conditions and prices, please
contact the nearest Infineon Technologies Office (www.infineon.com).
Warnings
Due to technical requirements, components may contain dangerous substances. For information
on the types in question, please contact the nearest Infineon Technologies Office.
Infineon Technologies components may be used in life-support devices or systems only with
the express written approval of Infineon Technologies, if a failure of such components can
reasonably be expected to cause the failure of that life-support device or system or to affect
the safety or effectiveness of that device or system. Life support devices or systems are
intended to be implanted in the human body or to support and/or maintain and sustain
and/or protect human life. If they fail, it is reasonable to assume that the health of the user
or other persons may be endangered.
Rev. 3.1
2009-11-30
Page 14